Processors

[Gary_55]

• hello I have a problem with the installation of my heatsink (after having removed it):
• I cannot install the amd stock heatsink specifically
  the part that is anchored to the motherboard, I realized
  that it has some kind of springs that prevent them
  from lowering too much.
• When I was removing these screws
  I heard that those springs were ringing a lot, on the other
  hand I can exert down pressure so that these screws go
  down a bit, but they do not go as far as I can screw them in the motherboard,
  and the spring returns them to the beginning. any solution?

[Gary_55]

And i forgot to say: i have a ryzen 3 2200g 

[elstaci]

Are you using the AMD Stealth CPU Cooler that comes bundled with the Ryzen 3 2200g APU Processor?

See if this YouTube video on installing the AMD Stealth CPU Cooler helps any.

If you are using a 3rd party CPU Cooler than you need to post the Make & Model of the CPU Cooler.

[Gary_55 · Accepted solution]

Thx man for your response but actually its was something very stupid:

The problem was behind the motherboard the thing that is behind the motherboard and sostain the screws of the heatsink its was loose xd

Btw its seem your comunity is very helpful i will try to help anyone if i can.

[elstaci]

Just noticed I forgot to post the link to the YouTube video. Sorry about that.

Here is the link: https://www.youtube.com/watch?v=QW__5fmMvJs