cancel
Showing results for 
Search instead for 
Did you mean: 

Processors

scsi
Adept I
Adept I

Re: Board wont boot with 2 sticks of ram (not working dual channel)

Jump to solution

The sticks are on the QVL list of Asus, so that should be fine. Will try to boot in 2133Mhz tomorrow morning and see if that helps.

0 Kudos
elstaci
Esteemed Contributor III

Re: Board wont boot with 2 sticks of ram (not working dual channel)

Jump to solution

Just for your information only. But here are MSI BEEP Codes from this previous Thread at a tech site:

0 Kudos
korzychxp
Adept II
Adept II

Re: Board wont boot with 2 sticks of ram (not working dual channel)

Jump to solution

No : ) i set it myself.

jagwinnie
Journeyman III
Journeyman III

Re: Board wont boot with 2 sticks of ram (not working dual channel)

Jump to solution

Can you please tell me how you set this up, I also can not get it to boot with two sticks

0 Kudos
mzwizard
Journeyman III
Journeyman III

Re: Board wont boot with 2 sticks of ram (not working dual channel)

Jump to solution

Same issue here: Asus X370-PRIME PRO, bios 5220, Ryzen 5 3600.

Ram (2x8GB Corsair LPX) worked fine in dual channel with R5 1600X, but with the new R5 3600, my two sticks only work in slot A1 and A2, either one at a time or both. Nothing will boot from B1 or B2.

My details:  AMD Ryzen 5 3600 @ 4398.97 MHz - CPU-Z VALIDATOR 

0 Kudos
scsi
Adept I
Adept I

Re: Board wont boot with 2 sticks of ram (not working dual channel)

Jump to solution

For me, it was a faulty Ryzen 5 CPU. Motherboard and RAM worked fine (had it pass memtest 4 runs without issues with the Athlon 200G)

I'd suggest you write to AMD and fill in the RMA procedure. They are very responsive and very helpful.

They helped me swap my CPU in one day (on the 30/12 or 31/12) - nothing but support for their RMA department.

0 Kudos
nightshade231_
Journeyman III
Journeyman III

Re: Board wont boot with 2 sticks of ram (not working dual channel)

Jump to solution

same issue here with the R5 1600 and a 2x8GB kit of G.SKILL Flare X F4-2400C16D-16GFX, boots with one stick, yet not with both (unstable, plus goes into single channel mode) on my B450M PRO4 from AsRock

0 Kudos
hardcoregames_
Big Boss
Big Boss

Re: Board wont boot with 2 sticks of ram (not working dual channel)

Jump to solution

My R5 3600 runs my RAM as expected at DDR4-3200 speed which is the fastest that the CPU can handle without spinning my wheels. 

The CPU logic works at its best with the RAM I have. G.Skill Flare X DDR4-3200.

0 Kudos
hardcoregames_
Big Boss
Big Boss

Re: Board wont boot with 2 sticks of ram (not working dual channel)

Jump to solution

nightshade231_ wrote:

same issue here with the R5 1600 and a 2x8GB kit of G.SKILL Flare X F4-2400C16D-16GFX, boots with one stick, yet not with both (unstable, plus goes into single channel mode) on my B450M PRO4 from AsRock

I presume you have the latest BIOS installed

0 Kudos