cancel
Showing results for 
Search instead for 
Did you mean: 

Processors

Xeonophon
Journeyman III

2200g + 7 GPU, white led no boot.

Hi,

I just swapped out my ryzen  5 1600 and replaced it with a 2200g.

I was having no problems booting with 7 GPUs, but since i swapped to the 2200g i just get a white led on my motherboard when trying to boot.

I have set the 2200g as the main output and enabled igfx.

The system boots with just 2200g, but fails when the other gpus are connected.

Anyone have a fix?

B350 strix gaming f mobo

8gb ram

 

0 Likes
5 Replies
benman2785
Big Boss

1. do a cmos reset
2. choose PCIe speed as 3.0
3. choose correct video output slot in bios

PC: R7 2700X @PBO + RX 580 4G (1500MHz/2000MHz CL16) + 32G DDR4-3200CL14 + 144hz 1ms FS P + 75hz 1ms FS
Laptop: R5 2500U @30W + RX 560X (1400MHz/1500MHz) + 16G DDR4-2400CL16 + 120Hz 3ms FS
0 Likes

I have done reset and selected 2200g as main output.

Will try setting to pcie 3.0

0 Likes

no - set your PCIe GPU as output
also set the first PCIe slot as main graphical output

btw - what GPUs you are testing AND is your BIOS UEFI? does it support Legacy-mode?

PC: R7 2700X @PBO + RX 580 4G (1500MHz/2000MHz CL16) + 32G DDR4-3200CL14 + 144hz 1ms FS P + 75hz 1ms FS
Laptop: R5 2500U @30W + RX 560X (1400MHz/1500MHz) + 16G DDR4-2400CL16 + 120Hz 3ms FS
0 Likes

The gpus are all xfx 5700 xt triple dissipation .

The mobo is uefi but had a legacy option i think

0 Likes

also try to set your BIOS to legacy - sometimes it can work than ;)

PC: R7 2700X @PBO + RX 580 4G (1500MHz/2000MHz CL16) + 32G DDR4-3200CL14 + 144hz 1ms FS P + 75hz 1ms FS
Laptop: R5 2500U @30W + RX 560X (1400MHz/1500MHz) + 16G DDR4-2400CL16 + 120Hz 3ms FS
0 Likes