cancel
Showing results for 
Search instead for 
Did you mean: 

Processors

Проблема (Problem) с RAM DDR3 AMD FX.

Доброго времени суток.

Проблема заключается в том, что скорость записи в оперативную память не превышает 17000 MB/s не зависимо от частоты памяти.

Скорость чтения 24000 MB/s

Скорость записи 17000 MB/s

Скорость копирования 23000 MB/s

Задержка 65ns

Где узкое горлышко?

Почему скорость записи не соответствует другим режимам. 

Система:

Процессор AMD FX 8320E 4.0Ghz ОС

Материнская плата Gigabyte GA-970A-D3 (rev. 3.0).

RAM DDR3 1600 Mhz Kingsnon Hyper FURY HX316C10F/8 (2x8Gb) Тайминги 10-10-10-30 Dual Channel.

Good day.

The problem is that the write speed to RAM does not exceed 17000 MB / s, regardless of the memory frequency.

Read speed 24000 MB / s
Write Speed 17000 MB / s
Copy Speed 23000 MB / s
Delay 65ns

Where is the narrow neck?

Why the recording speed does not correspond to other modes.

System:

AMD FX 8320E Processor

Gigabyte GA-970A-D3 motherboard (rev. 3.0).

RAM DDR3 1600 Mhz Kingsnon Hyper FURY HX316C10F / 8 (2x8Gb) Timings 10-10-10-30 Dual Channel.

0 Likes
2 Replies

According to a Kingston HyperX PDF on your memory, the RAM Memory speed is determined by your motherboard BIOS:

You need to look at your RAM Memory BIOS Settings to see if it has something similar to XMP Settings/Options which overclocks the RAM Memory. In BIOS, you should be able to manually adjust the voltages and speeds of the RAM installed.

I suggest you either open a Kingston Support ticket or Gigabyte Support Ticket if you believe the speeds should be higher than what you posted.

The last BIOS version is from 02/06/2015. Also you didn't post what Windows version you have installed.

NOTE: From CPU World Specs on your Processor concerning Memory Controller in the CPU:

0 Likes

Good afternoon!
In bios settings, speed and timings are set in auto mode.
The memory operating frequency is 1600 with timings of 10-10-10-30 at 1.5V in the DUAL channel.
Used windows 7 professional x64.

CPU Frequency 4.0GHz
FSB bus frequency 200Mhz
Northbridge Clock 2200Mhz
Frequency HT 2400mhz

I ask you to give recommendations, please.

0 Likes