Hello,
my spec: intel i5 11400 2.60ghz
sapphire pulse amd radeon rx6600 8gb, adrenaline 24.1.1
16gb ram
500gb ssd disk
monitor omen by hp 25, freesync
using windows 11 23h2
My monitor is connected to gpu with displayport 1.4 cable, and i get 144hz with freesync on, but i needed to make custom resolution because vram of gpu was always on max frequency when computer is idle, and for now works fine but also noticing in adrenaline 24.1.1 that link speed is always 2.7x4 gpbs and should be higher since my monitor support display port 1.2. First it was connected with displayport cable from box with monitor, and now i buy displayport cable 1.4 but result is the same, nothing changed. Frequency is maxed on idle state of gpu and still writing 2.7.x4 link speed of displayport...this is my custom resolution which works for now:
Timing Info - Horizontal - Vertical
Total - 2080 - 1157
Display - 1920 - 1080
Front Porch - 48 - 3
Sync Width - 32 - 5
Polarity - Positive - Negative
Interlaced/Progressive - Progressive
G.Pixel Clock (KHz) - 346500
G.Refresh Rate (Hz) - 143.981
HDMI Link Status Monitoring - Disabled
Current Link Settings - 2.7 Gbps x 4
FreeSync Range - 42 to 144 Hz reported by display
Anybody have same issues as i and what can i do about it?
Thx in advance for reply.
Best regards.
