So after recently installing my 5600xt on a clean windows install, almost every time i turn my PC on, immediately after the bios screen it freezes to a black screen, then after turning it off and trying it for a second time, it will freeze at the windows login screen. Finally after a 3rd time of powering it up it will start up and work normally and won't freeze at all, i can play a game for 3 hours and it won't freeze, it seems to be ONLY while starting up. My previous graphics card was a 1050ti and i have used DDU to remove all NVIDIA drivers, does anyone have any ideas?
My motherboard: B350M PRO VDH
CPU: Ryzen 1600x
Same problem here.
Only during boot. I noticed that if I restart the pc after the problem occurs, it doesn't happen anymore.
In my case, windows break in load if I spend some time (a few hours) with the pc turned off. I even thought it could be a capacitor or solder problem on my board. But I noticed that several people have the same problem.
I have already tested the driver 20.5.1 and 20.4.2. At the moment my BIOS is with version F2. I'm using an ASUS x570 TUF motherboard with a Ryzer 3800X and CORSAIR memories.
I still don't have a solution.
I am currently testing with a 60Hz monitor via HDMI cable to rule out problems on my 75Hz monitor that was using DP.
after updating my vBIOS to F3 version, it seems to have fixed the problem finally, will update.
Got the same problem here. the only way to boot the computer is to stand still in the bios for 5 minutes. My card is out for RMA, but in the meantime, new vBios we're made available for my card and it seems to fix this issues from what i've read
Which particular card do you have? I'm sure it's a software thing in my case because I had my pc running without any driver software for about 3 days now and it hasn't happened once, but as soon as I install the Radeon software, it starts happening.
Where can I check my video card BIOS version?
You are using a driver for 5600XT without Radeon software? how? Where you get the driver?
Use GPU-Z.