cancel
Showing results for 
Search instead for 
Did you mean: 

Graphics Cards

rullamann
Journeyman III

W7000 3 or 4 outputs using active DP>DVI adaptors

Hello,

I wanted to connect 3 or 4 outputs to a W7000 graphics adapter using 3/4 active DP>DVI adaptors. This is not working. Only two monintors are working the others either don't show up at all or are displayed as inactive.

The setup works if I connect 2 DP>DVI adapters and connect an additional Display with naitve Displayport.

As mentioned in the manual the W7000 has two clocks. Each clock supports 2 displays with active adapters. In my opinion my setup with 4 active DP>DVI adapters should work.

This is the excerpt from the manual:

Different types of displays can be combined within the following parameters:

•Your AMD FirePro™ W7000 has two clocks.

•Two displays connected with active adaptors (active single-link DVI, dual-link DVI, and VGA) can share a clock, while displays connected with passive adaptors (passive single-link DVI and HDMI) require a separate clock per device.

•DisplayPort 1.2 connections supporting DisplayPort Multi-stream technologycan connect to multiple DisplayPort devices.

•Monitors connected via passive adapters must all have the same resolution andrefresh rate.

0 Likes
2 Replies
qyy
Journeyman III

you can try that extend desktop to this display:

resolution.png

0 Likes
socrpro192
Journeyman III

did you ever find a answer to this question. i have a similar problem

0 Likes