cancel
Showing results for 
Search instead for 
Did you mean: 

Graphics Cards

Dema
Adept I

VGA XFX RADEON RX 6600 GRAPHIC PROBLEM

valorant 22.pngI recently assembled my new pc with the following components:

MSI PRO B660M-E DDR4
Intel Core i3-12100F
Kingston FURY Beast 16GB (2x8GB) 3600MHz DDR4 CL17
VGA XFX RADEON RX 6600 SPEEDSTER SWFT 210 8GB GDDR6
Sharkoon 600WATT 80PLUS Bronze

Monitor:  Samsung  C24RG50 

I set the resolution to 1920x1080 in the Windows graphics settings, but the graphics are very bad and there are noticeable lines of pixels around the figures when playing games or watching videos.

does anyone know how to fix it?

0 Likes
1 Solution
Volkdude85
Challenger

just start playing with settings until you have the right pretty vs fast ratio.

Samsung might have a low latency "game/PC" mode for the TV that helps

View solution in original post

10 Replies

How is your Samsung Monitor connected to your GPU card? DP or HDMI cable?

Which version of AMD driver are you using?

Which version of Windows do you have installed?

Have you tried adjusting your Monitor's and Radeon Settings? 

Here is the latest AMD driver: https://www.amd.com/en/support/graphics/amd-radeon-6000-series/amd-radeon-6600-series/amd-radeon-rx-...

Here is the previous AMD Drivers: https://www.amd.com/en/support/previous-drivers/graphics/amd-radeon-6000-series/amd-radeon-6600-seri...

 

 

 

0 Likes

The monitor is connected with HDMI 2.1 to the GPU. 

Im using the 22.5.1 version of AMD Software on windows 10 pro.

The monitor is running in 1920x1080 in 144Hz, other monitor settings change colors, sharpness (set to 0), response time (fastest) and FreeSync (OFF).

In the radeon settings i set the custom resolution but nothing changed.Immagine 2022-11-17 165318.png

Just for troubleshootng purposes, Have you tried a lower frequency like 120hz or 60 hz to see if the game works better?

Also have you checked on the Samsung Monitor Settings to see if you have HDMI set to the correct settings ? 

0 Likes
Dema
Adept I

I just tried 120 hz and 60hz and it doesnt change.

in the monitor i can chose between HDMI 2.0 or HDMI 1.4, and i chose the first. How can i verify if it's a GPU problem?

0 Likes

Connecting a different Monitor but I believe it most likely a driver issue.

Try changing to HDMI 1.4 and see if it changes anything.

Are you using a HDMI 2.0 or 2.1 cable to connect your monitor?  If you are using a HDMI 1.4 cable that could be the problem.

0 Likes
Dema
Adept I

I doubt it could be a monitor problem, since the graphic problem can also be seen in the screenshot.

0 Likes
Volkdude85
Challenger

What game is this?

Is V-sync on?

Anti-Aliasing? 

Does it look bad in other games?

V-sync should help the tearing 

HDMI signal tolerance for 2.0 is Tight, you need a 2.0 cord. it has to be 2.0. the signal has to move faster with less impedance.

0 Likes
Dema
Adept I

Im using HDMI 2.1

It looks bad in all games.

V-sync and anti-aliasing should i activate them from software AMD or from the game?

Now i try to uninstall AMD software and reinstall the version 22.11.1

0 Likes

I would in game most game settings will at least try to override. I have better luck with the recommended driver over the optional. I am   22.7.1

V sync waits for the horizontal lines to finish render because screens are wider than they are tall.

anti aliasing retraces lines with les jaggy's in polygons. 

Volkdude85
Challenger

just start playing with settings until you have the right pretty vs fast ratio.

Samsung might have a low latency "game/PC" mode for the TV that helps