cancel
Showing results for 
Search instead for 
Did you mean: 

Graphics Cards

amrelsisi
Journeyman III

Rx 580 and Cyberpunk 2077 low fps

Hello,

I have 8 gb ram , Rx 580 , i5 9400f

When i play the game on low, My fps drops to 8 fps some times, Without drops it's 40 fps but it's dropping all the times

medium 30~35 fps and always getting fps drops

How can i fix it ?
my resolution is 1920*1080 60Hz, Free sync on

0 Likes
4 Replies
benman2785
Big Boss

hi, i also play "Cyberpunk 2077" with my RX 580 4G

in 1080p low i get around 55-85fps with some tweaks (native would be 45-70fps)
use:
https://github.com/yamashi/CyberEngineTweaks
AND
https://github.com/derplayer/ConfigOverhaulCyberpunk

ps - 8GB of ram is NOT ENOUGH to get high framerates - like of my 32GB Cyberpunk will use 10-12GB and Windows need 2-3GB
so with your 8GB RAM you are choking "Cyberpunk 2077" with only 5-6GB available RAM
pps do you have 2x 4GB or 1x 8GB? DualChannel would highly benefit your fps

PC: R7 2700X @PBO + RX 580 4G (1500MHz/2000MHz CL16) + 32G DDR4-3200CL14 + 144hz 1ms FS P + 75hz 1ms FS
Laptop: R5 2500U @30W + RX 560X (1400MHz/1500MHz) + 16G DDR4-2400CL16 + 120Hz 3ms FS
0 Likes

how to install these tweaks ?
Should i put the whole folder into the game folder ? or put the files in it inside the game folder?

0 Likes

@amrelsisi 

rtfm ;)

there are FAQs with an installation guide on both github pages...

so RTFM!

PC: R7 2700X @PBO + RX 580 4G (1500MHz/2000MHz CL16) + 32G DDR4-3200CL14 + 144hz 1ms FS P + 75hz 1ms FS
Laptop: R5 2500U @30W + RX 560X (1400MHz/1500MHz) + 16G DDR4-2400CL16 + 120Hz 3ms FS
0 Likes
modmax1976
Journeyman III

esegui un prompt di msdos (cmd) come amministratore e copia incolla:

 

bcdedit /deletevalue useplatformclock      premi invio e riavvia assicurati che nel bios della scheda madre non ci sia attivata la voce use platform clock o simili questo è uno dei motivi per cui il gioco gira a volte molto piu lento dei quello che dovrebbe, poi chiaramente fai i dovuti aggiustamenti nelle propieta grafiche , a secondo dell hardware che possiedi io con un 2700x e una rx 570 xt facevo 20 fps con questo piccolo aggiustamento sono passato a 47/50, certo funziona a patto che ci sia attivato il generatore di clock interno alla mb e che sia presente in bcdedit la stringa useplatformclock true

0 Likes