cancel
Showing results for 
Search instead for 
Did you mean: 

Graphics Cards

lambchops
Journeyman III

RX 5600 XT not performing well

Hey guys,

I just upgraded my gpu from a 1050ti to an RX 5600 XT.  I used DDU to unninstall my Nvidia drivers. I installed the recommended recent drivers from AMD's site. However I am still getting similar performance to what I would get on my 1050ti. For example: in Valorant I should be getting around 250 fps on low settings in conjuction with my i5 9600kf according to this video, https://www.youtube.com/watch?v=4TvXm938bBg however I only get around 120 fps.

Im not quite sure whats going on, heres a link to a benchmark, which also has my specs in it https://www.userbenchmark.com/UserRun/37644540

Any help is appreciated, I will check this when I wake up tomorrow, thanks.

0 Likes
7 Replies
benman2785
Big Boss

disable Win10 auto-driver-install
update Win10 to 20H2
run DDU again
in safe-mode (requires reboot)
clean AMD and Nvidia driver
reboot again
install AMD 20.12.1
uninstall game
reboot
install game again
test ;)

PC: R7 2700X @PBO + RX 580 4G (1500MHz/2000MHz CL16) + 32G DDR4-3200CL14 + 144hz 1ms FS P + 75hz 1ms FS
Laptop: R5 2500U @30W + RX 560X (1400MHz/1500MHz) + 16G DDR4-2400CL16 + 120Hz 3ms FS
0 Likes

Whats your motherboard?

0 Likes


@Diegollum wrote:

Whats your motherboard?



It's a Gigabyte Z390 UD

0 Likes

Thanks! I'll test this out

0 Likes


@benman2785 wrote:

disable Win10 auto-driver-install
update Win10 to 20H2
run DDU again
in safe-mode (requires reboot)
clean AMD and Nvidia driver
reboot again
install AMD 20.12.1
uninstall game
reboot
install game again
test ;)


I followed all of these steps and unfortunately I still run at 120 fps, if you have any other tips that would be very helpful but thank you regardless.

0 Likes

From Sapphire Sent me this.

"Dear Customer :

We will suggest to below steps that we updated recently -

1. Update the latest MB BIOS and then go to MB BIOS setting page to set the CSM as disable or UEFI mode.
2. Within MB BIOS setting page , please set PCIE speed to Gen3 instead of AUTO if your MB does not support Gen4.
3. Format and select GPT instead of MBR to install a pure Windows 10 X64.
4. Use windows update to get Windows 10 X64 ver : 2004 or above
5. Un-check ' Turn on fast startup'
6. Add Power Limit within CCC to +20%."
 
not 100% sure it works, but try
0 Likes

mh, uninstall game and clear all tempfiles (wintemp and game temp and game settings etc)

PC: R7 2700X @PBO + RX 580 4G (1500MHz/2000MHz CL16) + 32G DDR4-3200CL14 + 144hz 1ms FS P + 75hz 1ms FS
Laptop: R5 2500U @30W + RX 560X (1400MHz/1500MHz) + 16G DDR4-2400CL16 + 120Hz 3ms FS
0 Likes