I have connected my RX 470 via HDMI on my Philips TV but it's just say no signal and nothing happens. The sounds stop on my PC but that's all. The cable works for sure, no issue on my laptop. One time it worked for about 5 minutes but than disconnected and nothing.
Solved! Go to Solution.
Locate the comparable monitors for use with AMD video cards here:
If your monitor is not listed, try a different port. Common ports for use with these monitors is the display port & HDMI port. Always make sure that the display cable as well as the HDMI cable are current and up to date based on the current AMD software version.
It worked on time for a short time but nothing now just no signal... I can't believe it's not working just like this... no issue on my laptop...
Sounds like you need to set the resolution and/or refresh rate to what the TV can handle. You don't need a freesync monitor. It should work with your tv. And just because you're using a HDMI cable that works for one thing, doesn't mean it will work for higher resolutions/refresh rates. Keep that in mind. You may need a better cable, depending on what your cable is rated and what your resolution/refresh rate is.
No issue with the cable. It's just works fine on my laptop which is cheaper than this card... it's seriously a joke.
I have set up the refresh rate and the resolution but nothing. The radeon controll panels show the TV but no screen at all. As I said it worked for 5 minutes and stopped.
Both does this by default and no issue with my laptop. The radeon does nothing except it's turns off the PC sound. According to the radeon controll panel the TV refresh rate is 24 hz not 59 but it doesn't matter if I change it or not. Nor 24 or 59 work on my PC while both does with my laptop.