cancel
Showing results for 
Search instead for 
Did you mean: 

Graphics Cards

avor14
Journeyman III

Problems while crossfiring sapphire nitro+ rx580 special edition and ASUS Strix rx 580 8gb

Whenever I configure crossfire on the cards, the fans and lighting stops on the sapphire. Please help.

0 Likes
12 Replies
Ray_AMD
Community Manager

Please provide the essential INFORMATION REQUIRED WHEN POSTING A QUESTION.

Motherboard - ASUS prime x370 pro

CPU- Ryzen 5 1500x

RAM - Hyperx fury 8gigs 2x8

PSU - FSP hyper 600

OS drive- Samsung 100gb

0 Likes
Ray_AMD
Community Manager

Right off the top, I'd say you have an inadequate power supply for this configuration.

0 Likes
avor14
Journeyman III

If i do, what could be another problem?

After I installed the driver, there was a popup that said system32 is not compatible with windows

0 Likes

I also calculated that the system takes about 540 watts total, meaning the power supply would be enough

0 Likes

Also, when I start mining, and I try to connect with teamviewer, it doesn't work, but with one rx and a 1050ti it worked perfectly

0 Likes
Ray_AMD
Community Manager

Also, when mining you need to disable Crossfire.

0 Likes

Thank you for your help! will text back when I get a new PSU

0 Likes

Would a 850watt PSU be sufficient for two strix 580s and a 1050ti?

0 Likes
Ray_AMD
Community Manager

It will be enought for 2 RX580's. I cannot comment on the requirements for the 1050i.

Ray_AMD
Community Manager

The Minimum power requires for a single card is 500W.

0 Likes

You can check here > PSU REQUIREMENTS - RealHardTechX

0 Likes