Showing results for 
Search instead for 
Did you mean: 


Adept I

Only 100hz on 144hz monitor


I have some problem.

My aoc g2460pf monitor with premium freesync technology and display port 1.2 can run at 144Hz, the DP cable was included.

When it was 1066 from nvidia, the monitor worked without problems at this frequency.

When I put rx6600ht in the PC, I saw a maximum of 100Hz. I tried to install drivers on the monitor and set the custom resolution, but it does not help.

Windows was installed already with a new video card. video card driver 22.9. I tried to connect the cable to the adjacent port, but the monitor displays the message "no signal".

My PC: r5 5600, rx6600xt, asrock ab350m pro4(last bios)

Why this might be?

6 Replies

Right click on desktop-display settings-advanced display settings. You will see display information and under it click on display adapter and new window will open and click on monitor. There you can change refresh rate to 144 if its not already set. Not much I can do to help. I dont fully understant situation because you did skip details.

Adept I

I tried this, but I do not have a value above 100Hz

If you need more information let me know which one. I will write.





I didnt understand part when your monitor lose signal. Its strange you dont have option to set it to 144hz. Im not expert so sry if I give you false hope.

I use 22.8.2 and radeon software report corect freesync range. My AOC monitor did come with hdmi and display port if you have them both try one you didnt. Your gpu should have few dp and 1 hdmi port just try them all. I dont think problem is in 22.9 gpu driver. If you did change recently monitor settings try to reset monitor options to default. Make sure you connect monitor with gpu and not dp on motherboard. Maybe your friend or someone will let you to try their monitor or you should take your monitor and try it on other pc.

There is no signal on the 2nd and 3rd port of the DP. I am sure that this is a software problem, because when switching the signal between the 1st DP and HDMI, the signal to the DP stops going, after reboots and several cable disconnections, the signal appears (there was the same problem on the video card from Nvidia).
Maybe it has to do with the monitor.

I tried to remove the driver, it does not help, however, initially I did not install the driver on the monitor, but everything was the same.

hdmi works fine but hdmi doesn't support 144hz according to specs

Nevertheless thank you.


Try a different high bandwidth cable and see if the same behavior persists.  Cables that worked well with my nvidia cards didn't fare so well with my 6900 xt so I run 8k cables with it.

I'll try, thanks for the advice