I have a Firepro W2100 with two identical Dell monitors. The color temperature does not match between them. The software does not permit me to set the color temperature for each separately. Is there a way to fix this?
OK, here's what I found. The monitors are exactly the same model, purchased together (DELL S2415H) with HDMI inputs. The cables are DP to HDMI with integral adapters. However, here's what the Radeon Pro software reports:
Display 1 Color Setting (DELL S2415H, DVI-D (AMD FirePro W2100)) - This shows the color temperature settings
Display 2 Color Setting (DELL S2415H, HDMI (AMD FirePro W2100)) - This does not show the color temperature settings
I'm confused as to why Monitor 1 would show DVI-D connection (!!!), yet that one shows the setting for color temperature, and Monitor 2 shows HDMI without the setting. The cables only connect to HDMI ports. I've swapped the cables at the graphics card and it switches the readings for each of the monitors, e.g. Display 1 is the HDMI and Monitor 2 is the DVI-D (no surprise there).
We do not officially support DP-HDMI cables. You need to use the combination of a DP-HDMI adapters + HDMI cable (preferably certified ones, see the link below). There are over 1000 cable manufactures (my guess) around the world, most of them from China.
The answer is NO.
What you see in Radeon Pro Settings is the result of the communication between the graphics card and the monitor thru the cable and adapter. Let me answer your question with a simple scenario:
Certified DP cables/adapters:
If proper cable and adapters are used, the color temperature setting will show up in Radeon Pro Settings. See below: