cancel
Showing results for 
Search instead for 
Did you mean: 

Graphics

wiztech35
Journeyman III

Cannot enter bios with hdmi only vga port

Hi i have a ati radeon r7 200 graphics card for a while now I cannot enter my bios when my hdmi cord is pluged into my card. For my enter my bios i gotta unplug my hdmi and plug in vga port. I am so sick of doing that. How can I enter my bios with hdmi only? I want to be able to disable vga port on my card if possible to use hdmi all the time. Any idea how to do this? I been looking for months for help and nothing. I use my hdmi all the time.

0 Likes
6 Replies
goodplay
MVP

Turning off 'fast startup' in power settings was the usual fix.

What OS ?

Don't know why you can access from vga, but not hdmi (unless it's because you power off to swap cable/port).

Ryzen 5 5600x, B550 aorus pro ac, Hyper 212 black, 2 x 16gb F4-3600c16dgtzn kit, Aorus gen4 7000s 2tb, Nitro+RX6900XT, RM850, Win.10 Pro..
0 Likes

Ill have to login to my bios with my gigabytes motherboard. Is the fast startup located in bios? My os is dual boot between windows 7 and 10. I got both connected to the ati card the vga cord and hdmi and I gotta unplug hdmi from the monitor and plug in the vga to the port on my monitor then i gotta select vga and reboot to access bios. I only turn off the screen as i change cables on it as the computer is still running.

0 Likes

For Win10 https://tenforums.com/tutorials/4189-turn-off-fast-startup-windows-10-a.html

Ryzen 5 5600x, B550 aorus pro ac, Hyper 212 black, 2 x 16gb F4-3600c16dgtzn kit, Aorus gen4 7000s 2tb, Nitro+RX6900XT, RM850, Win.10 Pro..
0 Likes

goodplay MS isnt the problem here
wiztech35 pls do a cmos; load defaults - check again

i think its a MoBo bios problem

PC: R7 2700X @PBO + RX 580 4G (1500MHz/2000MHz CL16) + 32G DDR4-3200CL14 + 144hz 1ms FS P + 75hz 1ms FS
Laptop: R5 2500U @30W + RX 560X (1400MHz/1500MHz) + 16G DDR4-2400CL16 + 120Hz 3ms FS
0 Likes
wiztech35
Journeyman III

I disabled the win 10 fast start up and did not help. I know when its in bios but when using hdmi biso screen is black. I cannot take the cmos its behind alot of stuff in my case starting with the graphics card is like blocking to get it it easy. My computer is custom built. So getting the cmos i would gotta take out some stuff to get to it so cmos removal not a option.

0 Likes

AHH,

fast-boot of your BIOS/MoBo is more important (than MS fast-boot) here...

if you dont do a cmos WE CANT HELP YOU!https://www.ebay.de/itm/40X-2-54MM-Breadboard-Dupont-Jump-Wire-Stecker-auf-Stecker-Jumper-Kabel-10-3...

usually there are 2 pins that have to be shorted - and usually they are placed easy(ish) to reach
some better boards already have a cmos-button

AND when you found those 2 pins you could simply use: 40X 2.54MM Breadboard Dupont Jump Wire Stecker auf Stecker Jumper Kabel 10-30cm | eBay // jump wire "female to male" and buy a jumper to short them when ever you need to...

PC: R7 2700X @PBO + RX 580 4G (1500MHz/2000MHz CL16) + 32G DDR4-3200CL14 + 144hz 1ms FS P + 75hz 1ms FS
Laptop: R5 2500U @30W + RX 560X (1400MHz/1500MHz) + 16G DDR4-2400CL16 + 120Hz 3ms FS
0 Likes