Hello,
I bought a brand new config :
MSI x570 Gaming Edge Motherboard
Ryzen 8 CPU
AMD Radeon RX 5700 XT GPU
I took my old HDD and SSD (which I already formatted)
I added a brand new M2
2 DDR4 8Go Ram 3000Mhz
650W PSU (I took the one from my old computer)
I installed a brand new Windows 10
I built this all up and it booted just fine
When I boot the computer it works fine. The 4 LEDs on the MB goes on & off like it should
When I look onto the Device Manager my GPU is not here, it says it's running the defaut ATI windows graphics
When I try to update the list of Devices it crashes
When I try to update the AMD driver (which I don't have any installed at the moment) it crashes
I flashed my BIOS to the last version available on MSI website (it went from 1.0 to 1.2)
When I look into my computer, my graphic card has the Radeon logo red glowing, the fan is spinning and the HDMI port on the GPU is working since I can see my monitor display what it's supposed to
I tried running this in safe mode, I tried switching PCI 1.0 port to GEN3 and then GEN4
I don't know what to do to make it so my computer "recognises" the GPU... Any help?
Thanks in advance
I've been having the same issue for almost a week.
I have a Ryzen 7 2700x & the RX VEGA 64 on a Fatal1ty B450 Gaming K4 motherboard.
Such a headache.
I've been having similar problems for the last few days... When you say "I try to update the AMD driver (which I don't have any installed at the moment) it crashes" are you sure the entire computer is crashing? or is it possible the driver is making your monitor unrecognizable?
When I install the AMD drivers my screen goes blank (no video source), but when I plug in an older monitor it appears to still work. Something about the newest driver is making my UHD 4k display incompatible. If I install an older driver the computer doesn't even recognize the Rx 5700 XT, so I don't have sound or proper screen resolution. If I install the newest drivers I get a landslide of incompatibilities, and crashing. I've tried installing a number of different ways, and different drivers. In some install attempts I get the computer crashing with the warning "Stop code: SYSTEM_SERVICE_EXCEPTION. What failed: atikmdag.sys".