cancel
Showing results for 
Search instead for 
Did you mean: 

Graphics

Highlighted

AMD: Please look into adding R9 200-series support for Through The Woods.

I already posted this on the game's Steam Discussions page. And a developer responded with:
"This is a problem on certain Radeon cards, but we don't know why unfortunately. It may be caused by a bug with the baked lightmaps and the way Radeon cards renders them. If it is caused by the lightmap it makes sense that it gets worse with lower graphics. Some have reported that it may help to turn off "reflections."

Ryzen 7 1700X @3.791GHz (stable)
GIGABYTE GA-AB350M-Gaming 3 (Rev. 1.0)
XPG GAMMIX D10 16GB (2x8G) DDR4 3200 (auto speed stable)
Windows 10 Pro x64 Version 1803

Radeon Software Adrenalin 2019 Edition 19.1.2


1080p-59Hz (no 60 available) very high/maximum (VSYNC, all enabled): Game configuration is fine, game starts fine, gameplay starts fine, but is soon met with unrendered/black surfaces. This varies depending on the area/angle.I changed a few antialiasing/other one below or above it, and now everything's black. But restarting the game returns to normal for a short while.

1080-59 very high (no sync): Same, maybe 5% less often.

1080-59 high (VSYNC, all enabled): Much less unrendering.

1080-59 high (no sync): Much less unrendering, less often.

1080-59 medium (VSYNC, all enabled): Even less unrendering.

1080-59 medium (no sync): Same as above.

1080-59 low (VSYNC, all enabled): THE MOST UNRENDERING!

1080-59 low (no sync): NO CHANGE FROM ABOVE!

1080-59 lowest (VSYNC, all disabled): No problems most of the time, except sometimes in the original house moving the camera through the walls.


Screenshots attached (problem, normal, problem). I was told that it uses Direct3D (store page says DirectX 11).

2 Replies
Highlighted
Big Boss
Big Boss

Re: AMD: Please look into adding R9 200-series support for Through The Woods.

Looks like the problem is with the dev to rectify,

But they can't even fix the water bug.  

Ryzen 5 5600x, B550 aorus pro ac, Hyper 212 black, 2 x 16gb F4-3200c16d kit, Aorus nvme gen4 1tb,
Highlighted

Re: AMD: Please look into adding R9 200-series support for Through The Woods.

Actually, I just updated the driver from 19.1.2 (Radeon Settings untouched) to 19.3.2 (Radeon Settings changed to below, before starting the game). I'm still testing it for problems, but none so far.

Anti-aliasing Mode:        Use application settings
Anti-aliasing Method:        Multisampling
Morphological Filtering:    Off
Antisotropic Filtering Mode:    Use application settings
Texture Filtering Quality:    Standard
Surface Format Optimization:    On
Wait for Vertical Refresh:    Off, unless application specifies
OpenGL Triple Buffering:    Off
Shader Cache:            On
Tesselation Mode:        Use application settings
Radeon FreeSync:        On
Display Scaling:        Full panel
Frame Rate Target Control:    Disabled