cancel
Showing results for 
Search instead for 
Did you mean: 

Graphics

Highlighted
Adept II
Adept II

0x00000116 BSOD after change to Radeon VII

Jump to solution
  • Issue Description: My computer going black screen while I am gaming, and the music or skype will still work for about 30 seconds but mouse and keyboard are not active anymore, and than PC freeze and restart. After restarting PC, I fine BSOD message with error code 0x00000116 .
  • BSOD message:

    A problem has been detected and Windows has been shut down to prevent damage
    to your computer.

    The problem seems to be caused by the following file: dxgkrnl.sys

    If this is the first time you've seen this stop error screen,
    restart your computer. If this screen appears again, follow
    these steps:

    Check to make sure any new hardware or software is properly installed.
    If this is a new installation, ask your hardware or software manufacturer
    for any Windows updates you might need.

    If problems continue, disable or remove any newly installed hardware
    or software. Disable BIOS memory options such as caching or shadowing.
    If you need to use safe mode to remove or disable components, restart
    your computer, press F8 to select Advanced Startup Options, and then
    select Safe Mode.

    Technical Information:

    *** STOP: 0x00000116 (0xffffe4082410d4a0, 0xfffff8054ca60474, 0xffffffffc0000001,
    0x0000000000000003)

    *** dxgkrnl.sys - Address 0xfffff8054c39cf38 base at 0xfffff8054c200000 DateStamp
    0x04e5cf9e

  • Hardware:
    • Graphics card: Radeon VII work at default 1802MHz/1000MHz and default voltage setting 1111 mV
    • CPU: Intel i7-4790K
    • Motherboard: ASUS Z97-Pro Wifi/USB3.1
    • RAM: 32GB Kingston DDR3 @1866 MHz
    • PSU: Antec HCG 850W
    • Monitor 1: LG 27UK850-W @4K freesync enabled connect on Radeon VII
    • Monitor 2: Philips 237EQPH connect on Intel Graphic HD 4600
  • Software:
    • Windows 10 64 bit 1803
    • Latest graphics driver 19.4.1
    • Latest UEFI BIOS from AMD flashed

I have alos try connect one screen, flash install Win 10, even change my Antec EDGE 650W to this HCG 850W, but don't help. Does I get a bad Radeon VII card? or it's caused by other reason?

I'm considering to have a RMA service.

Update 2019/05/05:

After RMA, I got another card back at 4/24. I try undervoltage and get stable setting at 1800/1200MHz@980mV and 0% power limit. This setting pass Time Spy Extreme stress test at 99.4%, so I choose this as my normal setting.

For next two weeks, I still have same problem: BSOD 0x00000116 and 0x100000ea keep coming to me, but the frequency seems not so high, about once 2 days. These two BDOS error all active in same mode:

screen freeze (sound keep working) -> screen lost signal and turn off (sound stop working) -> wait minutes -> PC restart. And than the BSOD dump record is there.

During these two weeks, I try to turn off Enhanced sync and AMD overlay,  which seems no helping. Now I try  to turn off FreeSync at my LG 27UK850-W.

Temporary conclusion

Before I bought Radeon VII, I use Nvidia GTX1060 (new) and AMD Vega 64 (secondhand), and they all work perfectly. Specially Vega64 have all same radeon setting and works fine, but not Radeon VII. That means this should be VGA card hardware or drivers issue, not caused by other prat of PC, that's why I want to go RMA directly when the new Radeon VII comes issue. Now, The return card also comes with same issue too. It seems be very rare to get another card with same problem, I'm not sure for that it's only caused by VGA. I think I will test following part:

 

  • FreeSync off (testing)
  • Change from DP to HDMI
  • Change from 4K to 2K

If they all fail, I will try to use this Radeon VII at another PC for more testing. And than would be another RMA maybe...Orz.

1 Solution

Accepted Solutions
Highlighted
Adept II
Adept II

Re: 0x00000116 BSOD after change to Radeon VII

Jump to solution

Finally, I can confirm that the BSOD is caused by FreeSync. I have test with monitor's FreeSync off for a week, no more BSOD happened after that. So it seems the driver for Radeon VII is still some problems.

If you hit BSOD issue randomly with code 0x000000EA / 0x00000116 when gaming, I hope this will help.

View solution in original post

0 Kudos
44 Replies
Highlighted
Big Boss
Big Boss

Re: My PC Keep Get 0x00000116 BSOD after change to Radeon VII

Jump to solution

First step would be update to 1809 https://www.tenforums.com/tutorials/16397-repair-install-windows-10-place-upgrade.html

Ryzen 5 5600x, B550 aorus pro ac, Hyper 212 black, 2 x 16gb F4-3200c16d kit, Aorus nvme gen4 1tb,
0 Kudos
Highlighted
Adept II
Adept II

Re: My PC Keep Get 0x00000116 BSOD after change to Radeon VII

Jump to solution

I have finished upgrade to 1809 and testing. If there are any error I will report as soon as possible.

0 Kudos
Highlighted
Adept II
Adept II

Re: My PC Keep Get 0x00000116 BSOD after change to Radeon VII

Jump to solution

Well, it seems not helping.... My PC going dead again. This time is 0x100000ea.

The problem seems to be caused by the following file: atikmdag.sys

THREAD_STUCK_IN_DEVICE_DRIVER

*** STOP: 0x100000ea (0xffff9b0859f42080, 0x0000000000000000, 0x0000000000000000,
0x0000000000000000)

*** atikmdag.sys - Address 0xfffff800541dc17b base at 0xfffff800540e0000 DateStamp
0x5c9af4b0

Final record of Radeon VII is 1800MHz/1000MHz @GPU temp 75 C and Junction temp 101 C.

I don't think this is such extreme temperature condition to overheat crashing.

Everything I have tried told me that this would be the hardware problem, what do you think?

0 Kudos
Highlighted
Esteemed Contributor III

Re: My PC Keep Get 0x00000116 BSOD after change to Radeon VII

Jump to solution

Likely it is thermal throttling like all vegas. Look at the threads that show how to undervolt the vegas for stability. They may offer the solution you need to get that stable. Shame that on round 2 of vega they still can't make a card that works at default settings.

0 Kudos
Highlighted
Adept II
Adept II

Re: My PC Keep Get 0x00000116 BSOD after change to Radeon VII

Jump to solution

That would be very interesting because I have seen more high temperatures like core 80 C and junction goes to 115 C sometimes. And they work in this condition for minutes until the game over, everything seems be fine.

Also, I have try undervolt with a little overclock like 1900/1150 MHz @ 1080mV, I got the same problem as well. That’s why I try driver default clock and volt 1801/1000MHz @ 1112mV to test if the problem caused by the manual adjustment of clock or voltage.

0 Kudos
Highlighted
Esteemed Contributor III

Re: My PC Keep Get 0x00000116 BSOD after change to Radeon VII

Jump to solution

If older drivers don't help and none of those tweaks help then maybe you just have a bad card or an issue with your incoming power?

0 Kudos
Highlighted
Adept II
Adept II

Re: My PC Keep Get 0x00000116 BSOD after change to Radeon VII

Jump to solution

I see. I will use another PC for double check and go RMA service. Thanks for your help.

Highlighted
Adept I
Adept I

Re: My PC Keep Get 0x00000116 BSOD after change to Radeon VII

Jump to solution

Can you go into your Radeon settings for "gaming" and into the "global settings" and set the Frame Rate Target Controll to 50fps, and try gaming. Does it crash still crash while gaming?

0 Kudos
Highlighted
Adept II
Adept II

Re: My PC Keep Get 0x00000116 BSOD after change to Radeon VII

Jump to solution

Sorry for lately reply, I want to go RMA directly thought I have test for many setting. After it fail at another Ryzen 2700X PC, I think it is obviously a bad card. Another thing is that even the 50 FPS work, I don't want to have a video card cost $699 and only let me gaming at 50 FPS....