We had a power failure in our area and after power had been restored, all the settings made had been changed to its default. I was under this impression that this wouldn't happened after it has been saved.
Lately moved from nvidia card to amd 6000 series.
I get this randomly after every few days, bit of a pain and is not result of any errors. I only notice my wattage has gone back up, so I go undervolt it again (or load in the saved profile) - 7900xt
if you have power failure every few days , then you should contact some electrician .. and if it's only your computer that is crashing, maybe check components like psu , cables , eventuel OC etc
Its a feature of the card if it senses that it's being over or under watts. To save the card it will automatically shut down your computer and reset your settings. This also means you may want to get a new surge protector because your component sensed a wattage shift before your protective device.
If you have saved the setting, it means you can load them from profile, from the same place where you saved it.
If Radeon software does this often, try disabling Windows fast boot feature, but when you get a power failure, that is normal behaviour. Also Radeon software does that pretty much every time anything crashes, no matter what caused it.
The Performance Tuning menu settings are lost in the following siutations:
Default settings are restore to try and restore stability, even if the graphics card/driver is not the cause of instability.