just showing clock speeds for the ram to show 2400mhz teamgruop ram clockked at 3200mhz...near 1 year stable on those timings even on my old 2400g.....
My best run so far. Can't quiet hit 4.6Ghz on R20. Get a pop up message about an application error.
Ryzen 5 3600 @ 4.575 Ghz @ 1.35v.
MSI B450I Gaming AC MITX motherboard.
16 Gb 3200Mhz DDR4 Corsair Vengence LPX
CPu fan: noctua nh-u12a
All BIOS settings stock except for frequency and voltage (4575 @ 1.35v)
Ram timings stock with A-XMP enabled.
Max CPU temps <80C
holy hell. did you win the silicon lottery? i can get 4ghz if i leave ram default it wont post. if i OC ram and cpu it will if i OC just ram and not cpu it wont post either. best i can get is 4ghz (currently only using 2666mhz ripjaws .. may be a prob)
are you watercooled?
My results were with air cooling using a noctua nh-u12a. My case is a Fractal Design Nano s which has a 140mm intake fan and a 120mm exhaust fan.
The only settings I have change in the bios to overclock are in the AMD Overclocking section. I chose manual overclock and changed CPU frequency to 4.55ghz and CPU voltage to 1.35v. To get to this point I was setting the frequency in 100mhz steps until I crept up on 4.5ghz. I set the CPU, case and gpu fans to 100% when running R20. GPU is a GeForce® GTX 1660 SUPER™ GAMING OC 6G. I currently have my 3600 set at 4.25ghz at 1.3v as a daily driver with idle temp around 37 degrees. Even when using a Cryorig M9 Plus I was still able to hit 4.4ghz without becoming too unstable.