cancel
Showing results for 
Search instead for 
Did you mean: 

Drivers & Software

syg254
Journeyman III

Youtube videos offbeat with sound after overclocking

Hello,

My config :

MOBO = Asus Rog B360H

CPU = Intel Core i7-8700

GPU = 2 x RX580 Sapphire Nitro+ 4GB (1411 MHz clock, 1750 MHz Memory)

I am using 2 RX580 in CrossFire. I overclocked both for better performance in game. I did it from WattMan Settings and I set clock frequency to +5% (automatic voltage) and the memory to 1900 MHz (screenshots in attachements).

In game, there is no problem and in extreme use, I noticed a better performance.

But, when GPUs are overclocked, I have an offbeat with and video when I am watching YouTube after about 2 minutes of playing.

When I reset my overclock, I don't have this offbeat.

Why is there an offbeat when GPUs are overclocked ? Must I do an other configuration ?

I did notice an offbeat with other kind of videos.

Thanks for your help.

0 Likes
5 Replies

back off on the overclocking

0 Likes

If I post this question, it's because I don't want to back off my OC settings at each time. I want to keep OC everytime !

0 Likes

many programs are sensitive to the overclocking which is why I mentioned it

I was able to improve my memory performance which makes my rig noticeably faster

0 Likes

Try disabling "Hardware Acceleration" in your browser while overclocked and see if it makes a difference. If it doesn't make a difference then go back to stock settings for your GPU cards as mentioned in previous comment.

syg254
Journeyman III

Thanks for answer !

Disabling hardware acceleration doesn't provide a good performance for multimedia content and some videos seem to also offbeat.

I don't always need to overclock, so I can back off and set overclock when I need it. I don't think it is possible to set AMD GPUs by command line, but if it exists I'll take it .  Also, I would like to know why there is this problem when I overclock. If someone is a graphics specialist, I would appreciate a quick explanation .

But no problem, i will change my settings according to my need.

0 Likes