I get 55-75 fps in 1440p, 2x AA
and in 4k I am getting 45-60fps. without crossfire I get 15-30fps, "0x AA because you don't see jaggies @ 4k"
I have no artifacts of any sort and it runs well. I just have the regualr default settings set in the crimson settings for crossfire.
i wish I was as lucky as otterfluff but I am as bad lucky as mavericksy
w10 clean install, Bitdefender in gaming mode, Intel 4690K at 3,8G, 12 G memory, 2x water cooled Sapphire r9-290x not o'clocked
MSI after burner only for in game monitoring of clock and usage (temps is lower than 45 C at max) also usage of 4 cores CPU
radeon 16.2 after proper uninstalling the previous hotfiix which did no work
radeon settings default + xcom profile (Xcom2 is not mentioned in AMD profile list)
By the way, cannot find Rise of the Tombraider profile in list.
On same save ( Xcom2) crossfire disabled 1200x1080p fps 52 average fixed position, no movement
with cf enabled 45 fps.
although in MENU of game with cf 92 without 79
In game MSI Afterburner shows STEADY (fixed) 1000nhz clock. but usage of both cards is all over the place to keep the silly 40-50 fps steady in cf. Allover the place means between 0-100 % both 100% for 1second (polling is set to 1sec.) than, one 79 the other zero than it fluctuates to the other card 100 % and 16 for the second all for 1 sec or less average , then both 6 % Fully unpredictable. Steady however is the 40-50 fps . with no movement it stay steady within 1-2 fps deviation
AA is set to FSA, no bloom , all other variables set to max
The CPU usage is around 60-80% for all cores
In the end one card gives more fps
I defiantly have a Xcom 2 profile in the list. They even added the right icon for it in the 16.2 update. The fact that your missing it might very well be the reason you cant make this work. Trying to figure out how you can get it to find that might be key to fix your problems.
What name do you see in the predefined profile graphics list? xcom2.exe? I
see only xcom.exe n o t xcom2.exe you get there by clicking the AMD
crossfire mode in the main menu after clicking the XCOM2 icon, which it
copied from your game installed. I see for instance might and magic 7 icon
( have that game installed) or Fallout4 icon as the games are detected,
but both games are not mentioned in the crossfire list.
On Fri, Feb 26, 2016 at 11:49 PM, otterfluff <firstname.lastname@example.org>
I have the same performance issue too.
X99 + 5930K + 3 x 290x crossfire here. 16.2 drivers
XCOM 2 frame rates only went up from an average 30 to 45 fps -> 40 to 61 fps. I can still see major fluctuations in FPS here when interacting from inside the Avenger. frame rates can dip down to 1 fps here.
All my cards have power limit set to +50.
whats worse is that now I can even see frame stuttering even when switching around characters in the character edit menu prior to launching a mission.
1) I would have expected going from 1 GPU to 3 GPU would see much higher fps gains that just 15 fps.
2) why is there so much fps fluctuation in the game?
I dont know if XCOM is a AAA title or not. but anyone whose been gaming for a long time would know this franchise name. You'd think that there is much enthusiasm from both the game devs and gpu vendors alike to ensure its got a great experience from launch day. feels to me like AMD kind of cares, and Firaxis kinda of care even less. Its a great game with a nice style of game play ....pitty the performance side of things has been such a let down. hopefully in the next monthly update we will get a much better patch to solve most of these issues. I might replay the game again when that happens
I have the same problem with Crossfire 2x280X.
Clean installation of Windows 10 today, drivers updated (also Motherboard BIOS), Crimson 16.2...and can't see Fallout 4 or XCOM 2 Crossfire profine (neither The Division or Rise of the Tomb Raider ones, but I don't own these games). Since november waiting for Fallout 4 profile and it doesn't show, for XCOM 2 the same, and the performance in this game is simply ridiculous.
No MSI afterburner, no antivirus. I formated the computer just to fix this and it's the same s**t.
Anyone can help us?
By the way, how can I change my name for my User name?
So I tried to blow out all my drivers and start over to see if it would make a difference. I uninstalled 16.2 and then use the AMD Driver cleaner utility then reinstalled 16.2 from a new download off the website. No difference. Seems these are not in any way optimized as I still loose half my framerate using these. So for now disabled it in the profile and back up in the 80's on FPS, but I have to use FSAA and turn down HOA and Shadows to High as well as Depth of Field one notch. Looking forward to new drivers that will support Xfire and I can run at full graphics with MSAA x4 at 2560x1440
I forgot too to mention after months there is still no fallout 4 profile, which means for some top games AMD cannot find a solution, which means crossfire...?
and I cannot figure out also about my username is annaray but I see my family name here above my own posts in orange instead of annaray. What do you see? O r do posters see their own name while the community the username? If so , weird
New patch released today for XCOM2 from Firaxis that added support for SLI and Crossfire along with a whole laundry list of performance improvements. I am using the newest 16.3 drivers and can confirm Crossfire is fully supported now. Hitting over 90+ FPS on average in missions at 2560x1440 Maximum setting on my 2 Fury X cards. Game also seems much smoother overall and probably will also run a ton better on a single card now with their patches. Too bad I played 168 hours without it and now I'm getting bored of the game. I guess it will be good to go for the 3 DCL they have planned still though. With Steam Workshop mods replay value is going to be pretty good.
Now I just need The Division to run this good on SLI and I will be good to go