Got a brand new RX570 Pulse ITX
All working as expected except that Wattman ZeroRPM setting restore itself on enabled (without showing that) after suspend/wakeup on Windows 10. Don't know if also other wattman settings are resetting (i will verify).
Radeon Software Adrenalin 2019 Edition 19.1.2
Anyone have the same problem?
After wake up i have to enable/disable ZeroRPM again and apply.. all start to work till next system suspension.
Ok after further testing there was a bug that prevents Wattman to retain a "single" settings change after wake up or restart of the system. I'm now on
Radeon WattMan may display the incorrect max fan/temperature values for AMD Radeon VII.
Radeon WattMan may experience issues with changed values failing to save or load when multiple changes are applied at once. FIXED
I will do further testing but since now the driver seems reliable.
on previous driver i was able to fix the issue changing also the manual settings for fan speed.
It's not in the bios......The Pros and Cons of Windows 10’s “Fast Startup” Mode
Deciding whether to bother with Fast Startup actually takes longer than turning it on or off. First, open up your power options by hitting Windows+X or right-clicking your Start menu and selecting Power Options. In the Power Options window, click “Choose what the power buttons do.”
If this is the first time you’ve messed with these settings, you’ll need click “Change settings that are currently unavailable” to make the Fast Startup option available for configuration.
Scroll to the bottom of the window and you should see “Turn on fast startup (recommended),” along with other shutdown settings. Just use the check box to enable or disable Fast Startup. Save your changes and shut down your system to test it out.
If you don’t see the option at all, it means hibernation is not enabled on your machine. In this case, the only shutdown options you’ll see are Sleep and Lock. The quickest way to enable hibernation is to close the power settings window and then hit Windows+X and open Command Prompt (Admin). At the Command Prompt, type the command:
powercfg /hibernate on
After turning hibernate on, run through the steps again and you should see both the Hibernate and Fast Startup options.
yes as i said in not enabled...and as i said the problem was also on restart..
anyway seems that changing 2 settings instead of only one (zero rpm) just works as intended.
i still have to test with new driver.
I have the same issue with my Nitro+ RX 580. All of my other settings are fine in Wattman except for my fan curve and 0 RPM mode.