Drivers & Software

[abrazive]

Hi,

So I'm having a lot of issues with my brand new gigabyte RX5600xt on my brand new build

R5 3600

Tomahawk Max

G.Skills 3200 16gb

EVGA 600 BR 80+

So to make it simple, the GPU only work on a fresh install of windows without any video divers.

I've tried;

Update 20.2.2

Udpate 20.4.2

Flash the bios to FA0 and F2 the original one was F60.

Switching the PCI-E in the bios to GEN3 and not auto.

Clear CMOS

All of these steps we're made on a fresh install at each time while uninstalling chipset with AMD clean utility. DDU the graphics driver, reboot, install graphics drivers, reboot, install chipset, reboot.

Upon restart, I get a blackscreen and the VGA EZ-Debug Led is on.

Any advice on what to do next.

Thanks,

[mickeekung]

I think you have to wait until 20.5.1 come out.

[hardcoregames_]

The BIOS is the culprit for the red LED being on. There are lots of problems with RAM and video cards.

[abrazive]

Well, that is not very useful for a 4 month old card to wait for drivers again, no? SO everyone with this card suffer from this issues?

[abrazive]

Thanks, for the reply. motherboard bios or gpu bios? are you saying that there is an incompatibility issues between my RAM and my GPU?

[mickeekung]

Many people said if's caused by PSU. Can you change it and try again?

[hardcoregames_]

abrazive wrote:

Thanks, for the reply. motherboard bios or gpu bios? are you saying that there is an incompatibility issues between my RAM and my GPU?

I have personally seen lots of that in my studio

[abrazive]

I don't have another one to try, i'll send the computer to another local shop because the first one said everything was ok but didn't test the parts, only re-format... we'll check all the components...

[abrazive]

Ok Thanls, I'll look into that

[Matt_AMD]

Have you tried updating the motherboard BIOS to the latest version?

If you have tried that it sounds like the GPU may be faulty.