You seem to have added a QWORD instead of DWORD, perhaps that's the reason you are not seeing any difference.
Should be the 32-bit value, instead of 64-bit. I almost did the same as I didn't notice they were different at a quick glance!
I also experience the following:
Hi, thanks for your comment. Is there a specific 19.X driver people are referring to that the black screen bug isn't happening on?
I have the 5600XT and got a XFX Fatboy RX590 on a lark to try to troubleshoot and they both have the problem you're describing, with 20.2.2 (esp. the 590, which is completely thermally wacky and shuts down). 20.2.2 may have taken care of a good chunk of the issues, but the problem is still out there unfortunately.
I also have very similar issues:
Graphic card is a Gigabyte 5600 XT Gaming OC 6G with drivers version 20.2.2.
I also experience frequent crashes in Windows 10, where my computer freezes up and then reboots. By "frequent", I mean at least once a day, which represnents approximately 5 hours of usage.
Freeze and reboot happened in various situations:
I noticed a live kernel report from the time of the last reboot:
Not a VIDEO_TDR_FAILURE (116), nor a VIDEO_TDR_TIMEOUT_DETECTED (117), but it was a VIDEO_ENGINE_TIMEOUT_DETECTED (141)
Do you think that applying the TdrDelay to 8 in registry can help?
* Bugcheck Analysis *
One of the the display engines failed to respond in timely fashion.
(This code can never be used for a real bugcheck.)
Arg1: ffff9f0170220460, Optional pointer to internal TDR recovery context (TDR_RECOVERY_CONTEXT).
Arg2: fffff805324109f0, The pointer into responsible device driver module (e.g owner tag).
Arg3: 0000000000000000, The secondary driver specific bucketing key.
Arg4: 0000000000000364, Optional internal context dependent data.
Unable to load image atikmpag.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for atikmpag.sys
Key : Analysis.CPU.Sec
Key : Analysis.DebugAnalysisProvider.CPP
Value: Create: 8007007e on KEN
Key : Analysis.DebugData
Key : Analysis.DebugModel
Key : Analysis.Elapsed.Sec
Key : Analysis.Memory.CommitPeak.Mb
Key : Analysis.System
TAG_NOT_DEFINED_202b: *** Unknown TAG in analysis list 202b
ffffd28b`b9c455a0 fffff805`3171f97f : ffff9f01`70220460 ffffd28b`b9c45740 ffff9f01`70220460 ffff9f01`65665a70 : watchdog!WdDbgReportRecreate+0x116
ffffd28b`b9c455f0 fffff805`32ee037c : 00000000`00000000 00000000`c0000001 ffff9f01`70220460 ffff9f01`66cf0000 : dxgkrnl!TdrUpdateDbgReport+0x10f
ffffd28b`b9c45640 fffff805`32f7a27e : ffff9f01`66cf0000 00000000`00000000 00000000`00000001 ffff9f01`66cf0001 : dxgmms2!VidSchiResetEngine+0x7c0
ffffd28b`b9c45930 fffff805`32f51eff : ffff9f01`61831000 00000000`00000001 ffff9f01`00000000 00000000`00000000 : dxgmms2!VidSchiResetEngines+0xc2
ffffd28b`b9c45980 fffff805`32f2a1d4 : 00000000`00000102 00000000`001b76a0 00000000`00989680 00000000`00000001 : dxgmms2!VidSchiCheckHwProgress+0x27cff
ffffd28b`b9c459f0 fffff805`32eb8786 : ffff9f01`6730dbf0 ffff9f01`61831000 ffffd28b`b9c45b19 00000000`00989680 : dxgmms2!VidSchiWaitForSchedulerEvents+0x354
ffffd28b`b9c45ac0 fffff805`32f39990 : ffff9f01`67348400 ffff9f01`61831000 ffff9f01`673484d0 ffff9f01`63363a00 : dxgmms2!VidSchiScheduleCommandToRun+0x2c6
ffffd28b`b9c45b80 fffff805`32f3994a : ffff9f01`61831400 fffff805`32f39880 ffff9f01`61831000 00000000`00000000 : dxgmms2!VidSchiRun_PriorityTable+0x30
ffffd28b`b9c45bd0 fffff805`2506bce5 : ffff9f01`62121680 fffff805`00000001 ffff9f01`61831000 00000067`bcbbbdff : dxgmms2!VidSchiWorkerThread+0xca
ffffd28b`b9c45c10 fffff805`251c99ca : ffff8180`55a00180 ffff9f01`62121680 fffff805`2506bc90 00310020`006e0069 : nt!PspSystemThreadStartup+0x55
ffffd28b`b9c45c60 00000000`00000000 : ffffd28b`b9c46000 ffffd28b`b9c40000 00000000`00000000 00000000`00000000 : nt!KiStartSystemThread+0x2a
STACK_COMMAND: .thread ; .cxr ; kb
OSNAME: Windows 10
here is a video outlining the following steps i took to fix my issues with the 5600 xt, no crashes after 4 days
do this, i had zero crashes after 4 days so far
( i do not guarantee this will work for you,
this worked for me using:
gigabyte 5600 xt gaming oc 6g , with FA0 bios
msi mpg x570 gaming plus (newest bios)
ryzen 5 3600 (@4.3 ghz)
corsair vengeance rgb pro 32 GB (16 x 2 ) (@3600 mhz)
windows 10 ( dont think home / pro / build number makes a diff here, microsoft isnt to blame (this time)
DO THIS AT YOUR OWN RISK, I AM NOT RESPONSIBLE FOR PROBLEMS, DAMAGE, ETC.
1. uninstall radeon software (if freezes or has error dont worry goto 2)
2. run amd clean up utility (if freezes or has error dont worry goto 3)
3. boot windows into safe mode with networking (hold shift while clicking reboot in windows)
4. download and install display driver uninstaller
5. uninstall all gpu stuff and chipset stuff , using ddu , (display driver uninstaller)
7. check device manager, make sure display adapter says generic device, if not repeat steps 1 - 6
8. download amd chipset drivers directly from amd, selecting the appropriate categories (for AMD CPU users,,,, (((i would imagine the same would hold true for intel cpus),
( i didnt use ones from my mobo manufacturer)
9. install the latest correct chipset drivers only from amd, (intel for blue team) ( NO ADRENALIN OR GPU STUFF FROM AMD)
11. download adrenalin, unpack it, (( it will show a generic unzip progress bar, let it finish, when the fancy splash screen comes up that say "do you want to install adrenalin" "CLICK CLOSE / NO ****** DO NOT INSTALL ADRENALIN OR ANY AMD GPU SOFTWARE **** we are just unpacking it to get to the drivers
12. goto device manager right click on generic display driver, hit update driver
> select "browse my computer for driver software"
> choose "let me pick from a list......"
> choose "have disk"
> goto the folder that adrenalin unpacked to ussually c:\amd , im not sure what subfolder it is in, i think one that says adrenalin, either way locate C0353065.inf (i beleive there was a driver subfolder and like a win32 / win64 etc folders, choose the one appropriate for your system) (this may differ slightly for diff versions in the future) click ok, choose the top 5600 xt driver, click next,
13. (this should install the driver without adrenalin, device manager should now say "5600 xt" under display adapters)
congratulations, no more crashes (AMD please fix your software or make it alot easier to install just the drivers, nvidia doesnt force u to use geforce experience, cough , cough
14. can over clock with asus gpu tweaker ii