Hello, I installed two Sata HDD Drives in Raid 0, so I had to switch from AHCI to Raid. Therefore I did a clean install with the latest windows versions and raid drivers (2.20.1937) using RAID_NVMe_DID.
Every single time I end up with a clean systems randomly freezing with 100% Disk usage (no data throughput) on my SATA SSD drive (and sometimes also on my NVMe drive). I did several reinstalls, but the problem persists, even after disabling the usual suspects: superfetch, bits, windows search, ...
The problems started with switching to raid - as my windows was up to date before while running AHCI, I suppose there is a problem with storage management caused by the RAID drivers. My Device Manager shows: 2x AMD-RAID Bottom Device + 2x AMD-RAID Controller [storport]. Is that normal?
Thanks for your help, Werner
OS Name Microsoft Windows 11 Pro Version 10.0.22631 Build 22631 BIOS Mode UEFI BIOS Version/Date American Megatrends International, LLC. 1.H1, 15/05/2023 SMBIOS Version 2.8 Embedded Controller Version 255.255
BaseBoard Manufacturer Micro-Star International Co., Ltd. BaseBoard Version 1.0
System Model MS-7B85 BaseBoard Product B450 GAMING PRO CARBON AC (MS-7B85)