Showing results for 
Search instead for 
Did you mean: 

Drivers & Software

Journeyman III

No videosignal

Greetings, I've bought Sapphire Pulse Radeon RX 570 4 Gb recently, but I am experiencing a following problem: I have no signal on my display after installing the drivers. I do have the signal without any drivers, in Safe Mode as well, but after installing them it simply disappears after Windows loading picture. The GPU has been tested on another PC and works just fine. I suspect that happens because of my PSU wattage, but still, any help would be appreciated

500W PSU

GPU: AMD Athlon II X4 640

Motherboard: MSI 870A-G54

Windows 7 x64

The GPU is connected to the monitor via DVI cable, can't test it with HDMI/DisplayPort just yet

The monitor itself is Philips 221V (not sure about the 221V part, really)

Edit: I also made sure the previous drivers (R7 370 Nitro) have been uninstalled, tried installing from the AMD Website, the compact-disk I received together with the GPU, the Sapphire website as well

0 Replies