Yesterday I updated my GPU drivers. The screen turned black which i expected, but I didn't expect it to last so long. After waiting 2 hours i restarted my PC. There is no signal from both monitors. I checked my main monitor with a different PC, it works fine. The GPU lits up normally. I can't boot in safe mode or BIOS. The only thing that shows up is AOC logo for a second.
CPU: AMD Ryzen 5 5600X
GPU: XFX Radeon RX 5700 XT Thicc III Ultra 8GB GDDR6
Motherboard: ASUS PRIME B550M-A
Have you tried starting up with one monitor connected?
Yes, I tried different combinations - once with the DP solo, once with the HDMI solo, but every time the "NO SIGNAL" message appears on the monitors.
I had something similar with my new self-build PC. There is a 2-3 digit code on the motherboard that isolates the error. It can be the BIOS / motherboard, the CPU, the RAM or the graphics card. I would reset the BIOS first because your startup logo appears. For me it was ultimately that the CPU cooler was screwed on too tight. After loosening the 4 screws, the PC finally started. Contact your motherboard manufacturer's support for problem resolution.
Hi, did you get sorted with your issue? My son updated his AMD driver today and shortly after the pc lost connection to the screen, troubleshooted cables, different screens pc still works dont know how to go about it now. please share your wisdom.
Boot into Windows safe mode
Use AMD driver uninstaller to remove problematic drivers:
Download latest drivers an install
If doesn't work, repeat, but install some older version of drivers. If he uses 3rd party antivirus and it is some free program, I'd uninstall it and use the one Windows has included.
Thank you so much for your reply. I have tried to run Bios or boot from bootable windows usb to be able to see anything on the screen. I'm still unable to see anything how did you get over that? Should I try and connect the drive to another pc?