cancel
Showing results for 
Search instead for 
Did you mean: 

Drivers & Software

pokester
Esteemed Contributor III

Re: My monitor supports 10bit but cannot be enabled in Radeon setting

Great they fixed it but should have put a revision on it. Could be many that have this issue and never reported it and would never know to see this thread and wouldn't think to download the same driver again. Very poor choice IMHO. Hope they at least put a disclaimer below it expaining this but since you're calling it silent. I'm guessing not. Hey at least it's hopefully fixed.   Thanks Ray & fsadough!

0 Kudos
fsadough
Staff
Staff

Re: My monitor supports 10bit but cannot be enabled in Radeon setting

10bit pixel format (bpp) has nothing to do with 10bit color/channel (bpc).

  • 10 bit per channel (bpc) is related to the number of bits per Color Channel (R=Red, G=Green, B=Blue)
  • 10 bit per pixel (bpp) Format is the number of bits in each pixel. The higher the number, the sharper is the image
0 Kudos
sakuramichitsuki
Adept III
Adept III

Re: My monitor supports 10bit but cannot be enabled in Radeon setting

I purchased AMD's latest Radeon VII graphics card
I still can't use 10bit under 4K@60, but at 4K@30, I can use 12bit.
Using DP 1.4
I hope AMD can fix this problem as soon as possible.

fsadough
Staff
Staff

Re: My monitor supports 10bit but cannot be enabled in Radeon setting

I don't think this is a driver issue.  However I can certainly investigate your issue, once you provide the EDID of your monitor. 

0 Kudos
sakuramichitsuki
Adept III
Adept III

Re: My monitor supports 10bit but cannot be enabled in Radeon setting

thank you very much

0 Kudos
fsadough
Staff
Staff

Re: My monitor supports 10bit but cannot be enabled in Radeon setting

  1. Download CRU_1.400.zip from https://wetransfer.com/downloads/93f3e9c37152a73a3b9e3605d434a2ba20190306174642/67e790365419c26d83f5...
  2. Unzip and run CRU.exe as admin
  3. A window like this will open
    pastedImage_3.png

  4. Click on Export

    pastedImage_4.png
  5. Enter a name
  6. Change "Save as type" from (*.bin) to (*.txt)
  7. Click on save
  8. Open the .txt file with Notepad
  9. Copy and any paste the content here
sakuramichitsuki
Adept III
Adept III

Re: My monitor supports 10bit but cannot be enabled in Radeon setting

00 FF FF FF FF FF FF 00 09 D1 50 79 45 54 00 00
2C 1C 01 04 B5 46 27 78 3F 59 95 AF 4F 42 AF 26
0F 50 54 25 4B 00 D1 C0 B3 00 A9 C0 81 80 81 00
81 C0 01 01 01 01 4D D0 00 A0 F0 70 3E 80 30 20
35 00 C0 1C 32 00 00 1A 00 00 00 FD 00 28 3C 87
87 3C 01 0A 20 20 20 20 20 20 00 00 00 FC 00 42
65 6E 51 20 45 57 33 32 37 30 55 0A 00 00 00 10
00 00 00 00 00 00 00 00 00 00 00 00 00 00 01 B2
02 03 3F 70 51 5D 5E 5F 60 61 10 1F 22 21 20 05
14 04 13 12 03 01 23 09 07 07 83 01 00 00 E2 00
C0 6D 03 0C 00 10 00 38 78 20 00 60 01 02 03 E3
05 E3 01 E4 0F 18 00 00 E6 06 07 01 53 4C 2C A3
66 00 A0 F0 70 1F 80 30 20 35 00 C0 1C 32 00 00
1A 56 5E 00 A0 A0 A0 29 50 2F 20 35 00 80 68 21
00 00 1A BF 65 00 50 A0 40 2E 60 08 20 08 08 80
90 21 00 00 1C 00 00 00 00 00 00 00 00 00 00 20

0 Kudos
sakuramichitsuki
Adept III
Adept III

Re: My monitor supports 10bit but cannot be enabled in Radeon setting

Also, why do I have only one monitor and the CRU shows three?

2.PNG

0 Kudos
dealio
Adept III
Adept III

Re: My monitor supports 10bit but cannot be enabled in Radeon setting

I already went to ToastyX and downloaded version 1.4.1. Based on your previous note, I was preparing the information you pictured in your email. But I won't be able to send it until later today because of a mentorship program I'm engaged in.

Thank you

David

-


fsadough <amd-external@jiveon.com> wrote:

"Re: My monitor supports 10bit but cannot be enabled in Radeon setting"

To view the discussion, visit: https://community.amd.com/message/2902999?commentID=2902999#comment-2902999

>

0 Kudos
fsadough
Staff
Staff

Re: My monitor supports 10bit but cannot be enabled in Radeon setting

PM me your email addresss

0 Kudos