All smart data is not readable after installation of new driver. If I roll back to previous driver 22.214.171.124 everything works again after reboot, shutdown and restart.
are you running latest "RAID EXPERT" software app with "administrator rights"? perhaps you'd not given it admin permissions..
also if its just reading the smart info off the drives i believe a number of different apps can possibly perform that. try the drive software from your drive vendor maybe ATADA SSD tools might do it? or was it samsung magician?
*edit sorry got the name of AMD raid software app confused
The apps stop showing s.m.a.r.t. data after new driver install. I never had a problem before. Like the post says if i roll back drivers everything works perfect. There must be a bug in latest software.
I got the exact same issue, but reverting back to the older driver didn't fix it.
X470 chipset, 2 x 8TB RAID0 array.
Almost all other drive and SSD and NVME storage tools and software i'd seen had mentioned about SMART monitoring logs and data being some sort of vulnerability where criminals could somehow predict or determine drive data or "used bits" or some sort of recovery index from the information so its advanced smart reporting features had since been disabled and only some tools may offer very limited functionality if it works at all now. Theres some chance you may not find verbose SMART data logs and reports and monitoring. Some tools previously let you download and view all SMART data. to me its all just hex and ones and zeroes everywhere so i've always ignored such features but to smelly criminals its gold. So no matter how hard you cry i dont think what you want like how it used to be will ever be the same way.
This simply does not make sense: I can read all the SMART data of the NVME that is not connected through the AMD RAID controller. It is just the driver that is buggy, as it has been stated multiple times.
Reading SMART data is essential to monitor the drive life status, its temperature and a lot of other useful data. It is possible only with administrative privileges and that fact that you don't understand it does not mean that it is not a valuable tool.
I am IT professional, I know what I am talking about and I am not crying, I am just complaining about a buggy driver.
it's definitely something broken .. I'm enabling the SMART polling in the RAIDXpert2 windows app and in the next restart it's disabled again and of course I'm not getting any SMART readings, even when it states that it is enabled.
This is happening to me too in a different way. Had a x470 system with NVMe drives and a StoreMI HDD with SSD cache and SMART info was working fine on all my drives - even the joined StoreMI drives were separately show (HWinfo64) with all SMART info. I could see temps and all the other info. Get my x570 Ryzen 5000 build up and running with new drives and some from the x470 system (with know working SMART info displayed) and now all SMART info is missing. HWinfo64 debug file clearly shows Read SMART Failed on all drives. I know the drives support it. And Ive seen AMD Ryzen systems even with StoreMI showing SMART info, but now the latest drivers and chipsets - whatever AMD has done - is not allowing any SMART info. Hope they can make an update soon to correct this. I have a brand new build with expensive drives that im not sure if they are running hot or keep having read errors (I doubt they are, but still)
FYI: Hard Disk Sentinel latest version 5.70 can detect and display all S.M.A.R.T. information about SATA hard disks / SSDs even with the latest 9.3 AMD RAID drivers or 9.4 StoreMI drivers.
Please refer to:
- improved detection of SATA hard disks / SSDs with AMD Bottom RAID controller driver 9.3
- improved detection of SATA hard disks / SSDs with AMD StoreMI 2.0 driver 9.4
Still no info for NVMe SSDs but at least the complete status and S.M.A.R.T. info for all SATA hard disks and SSDs are displayed with these drivers too.