I cannot install the storeMI 22.214.171.124, I get a splashscreen with the message "StoreMI does not support the system's processor and motherboard combination. please..."
My configuration is:
MSI B450M PRO-VDH MAX board
Ryzen 3 2200G
1 HDD 500Mo on STA1
1 SSD on M2 NVMe slot
In bios, secure boot is off, and AHCI mode is selected.
Did I miss anything?
thank you for your post, I though I was alone...
I contacted the AMD support, that gave me a lot of tips, but I'm still experiencing this issue. I list below the checks and tries I did:
- check windows version (I have the last one)
- check the BIOS (I have the last one)
- send to AMD dxdiag report (no feedback on this point so I suppose it was good)
- uninstall all AMD drivers then re-install
- reset my windows 10 installation (yes I did it, as it is a new PC it wasn't so hard...)
But none of this points solves the issue.
I also contact the MSI support (In France) because they talk about StoreMI on their internet site and my mother board is a MSI one, and the answer was quite a joke... " StoreMI is no more avalaible at AMD, it is why you get this error". And after several messages I didn't manage to explain the guy that AMD has released a new version, I get the feeling to talk to a deaf... (Note that I usually appreciate MSI support, but I think this time I didn't get the good guy...)
I am still in contact with AMD support, I will post here if they gave me a solution, but my feeling is that, curently, StoreMI is not working with this configuration (at least) or MSI need to do something in the BIOS.
Same here. I have a B450 motherboard with latest BIOS (just flashed) and ryzen7 5800x. I get the same screen.
my support tickets with AMD and MSI are still opened. And they seem to investigate on this point.
If they give me a solution I will post it here.
May be the page file associated with the Non-Windows drive could explain the installation issue:
Please try the below steps and see if that resolves the issue:
"Windows + R" type "SystemPropertiesAdvanced.exe" and launch the same -> Advanced -> Performance "Settings" -> Advanced Virtual Memory"Change" -> "Uncheck" Automatically manage paging file size for all drives Ensure "Paging" is only set to [Windows] Drive and not other drives.
After doing the steps, reboot the system and try installing StoreMI again. After StoreMI Installation, user can revert the Page file setting to previous settings if necessary.
sorry for the delay. and thanks you for your help, I really appreciate any tips and ideas.
Unfortunally, I didn't manage to solve the issue with this modification.
I still have the same error message (chipset and prcessor not supported)