cancel
Showing results for 
Search instead for 
Did you mean: 

Drivers & Software

killroy2963
Adept II

Gigabyte Master X570 d3 error code with new 21.4.1 drivers

Jump to solution

As the title states when I installed these new drivers I got a d3 error code on my motherboard. This happened when I went to the performance tab, but also when not even in the driver software. The error code translates to Some of the Architectural Protocols are not available. I also got a d2 error once, which is PCH initialization error.

I do not get these error codes with the previous set.

1 Solution

Accepted Solutions
killroy2963
Adept II

Re: Gigabyte Master X570 d3 error code with new 21.4.1 drivers

Jump to solution

Go to task scheduler library and look for AMDRyzenMasterSDKTask, right click and select disable, no more d3 error code.

 

You also do need to do a reboot.

View solution in original post

33 Replies
Fl1nch
Adept I

Re: Gigabyte Master X570 d3 error code with new 21.4.1 drivers

Jump to solution

Add me to the list.......same board and D3 code.

If I open Ryzen Master, then the debug code goes to F8

uninstalling the drivers and going back to the prior one removes the issue

 

kodo28
Adept II

Re: Gigabyte Master X570 d3 error code with new 21.4.1 drivers

Jump to solution

Same issue here with my Aorus X570 Xtreme. Fresh windows install with all app that I use no issue with code d3.

Soon as, I install the Radeon Software Adrenalin 21.4.1, it raise code d3 after some minutes of windows start.

amdmatt
Community Manager
Community Manager

Re: Gigabyte Master X570 d3 error code with new 21.4.1 drivers

Jump to solution

Thanks for the post, we are looking into this. 

Guwapo77
Journeyman III

Re: Gigabyte Master X570 d3 error code with new 21.4.1 drivers

Jump to solution

This was driving me crazy until I read this post.  Thank goodness I'm not alone.   Same problem - d3.   This is a new build Aorus Master with 5950x and Red Devil 6900XT.  

0 Likes
killroy2963
Adept II

Re: Gigabyte Master X570 d3 error code with new 21.4.1 drivers

Jump to solution

Go to task scheduler library and look for AMDRyzenMasterSDKTask, right click and select disable, no more d3 error code.

kodo28
Adept II

Re: Gigabyte Master X570 d3 error code with new 21.4.1 drivers

Jump to solution

Thanks it worked 

Tags (1)
0 Likes
Kaneda
Journeyman III

Re: Gigabyte Master X570 d3 error code with new 21.4.1 drivers

Jump to solution

Here's another one, also X570 Master, bios 33i, Ryzen9 5900X and an RX6900XT.

taskschd.msc command to get there, and seems a reboot is required.

0 Likes
Zarivan95
Journeyman III

Re: Gigabyte Master X570 d3 error code with new 21.4.1 drivers

Jump to solution

Exact same issue on my Asus ROG STRIX B550-E GAMING motherboard. Goes from AA to d3 after a few minutes, or immediately if manually opening Radeon software.

0 Likes
killroy2963
Adept II

Re: Gigabyte Master X570 d3 error code with new 21.4.1 drivers

Jump to solution

Go to task scheduler library and look for AMDRyzenMasterSDKTask, right click and select disable, no more d3 error code.

 

You also do need to do a reboot.

View solution in original post