Fortnite Battle Royale crashes frequently (31 times since Jan 19, based on FNBR error logs). It happens with this (see title) exact error. It typically happens 10-15 minutes into a game, I can't think of a time where it's happened in the very beginning of a game. All my graphics settings in the game are turned to off/lowest possible aside from view (render?) distance which is set to high (not epic). Framerate outside of this happening is usually fine (70-120 FPS range).
Here's the troubleshooting I've done thus far / additional info-
I read elsewhere that underclocking might be an option, and I'll try that if no other solution presents itself.
I didn't know what Wattman was so I searched and found this - https://support.amd.com/en-us/kb-articles/Pages/DH-020.aspx
I followed the guide to the point where I'm in Gaming -> Global settings, but I don't have a Global Wattman tab across the top. All I have is Global Graphics, GLobal OverDrive, and Performance Monitoring.
In the Global OverDrive tab I see a Power Control slider which is set to 0% but ranges -20% to +20% - is this equivalent (if so, what do I set it to?) If not, what should I do?
Your card should work with Wattman which is installed by the newer AMD Driver full set. If you have AMD Overdrive (An old version of Wattman) you probably going to need to uninstall it after setting everything on the GPU back to "Default".
The following is just for Information only:
Radeon WattMan Requirements
Radeon WattMan is supported on AMD Radeon R7 260 Graphics Series products and higher. It is recommended to always use the latest compatible driver for your GPU when configuring Radeon Wattman on a Windows® based system.
Windows compatibility is dependent on the GPU. Please check the Product Resources Center for specifications and compatibility information.
This from Reddit Forum:
Looks like you're the one still confused. Welcome to late 2013! That chart is totally outdated and incorrect.
After installing the AMD driver set. You need to activate Wattman in Radeon Settings as per the link you posted and where I got the info on Wattman Requirements.
Before seeing your post, elstaci, I'd tried adjusting the Power Control to +20% in OverDrive as pokester suggested, and I just experienced a crash with the same error.
I'm super confused. I very recently (days ago) used the DDU to completely remove my drivers and reinstall the latest drivers I could find for my card on AMD's site. I don't know how I wouldn't have the most up to date drivers.
Happy to try uninstalling/reinstalling again if you think that'd help.
Next things to try.
Is your windows power settings on High Performance. If not do that.
Second disable hybrid/hibernation sleep.
Third disable Fast Startup.
You can google all these, as to how to do them easily.
Windows power setting wasn't set to high - set it.
Disabled hybrid/hibernation sleep.
Can't find/disable Fast Startup - doesn't seem to be a feature of Windows 7?
Unless these require Windows to restart, this didn't do the trick - had another crash.
No sorry you are correct no Fast Startup that is Windows 8 and later.
But yes absolutely restart, you don't reinitialize the kernel if you don't.
That is also why it is asked to disable fast startup. Windows 7 always resets the kernel on restart. Win 8 & 10 do not by default, so changes or issues don't get resolved until a true full restart happens.
See if that helps and we will keep plugging away at this.
How many watts and what model power supply do you have?
I hate to see you have to resort to under-clocking too as this is the point of raising the power limit. Under-clocking effectively does the same thing but at a performance defect.
Haven't had a chance to test the latest fix yet (attending a wedding tonight, yay), hopefully will be able to tomorrow.
Just checking- I know you said I need to restart for some of those changes to take effect Does that also include the power slider setting in wattman / overdrive? If so, I don't think I'd restarted after trying that.
In the meantime, this is my power supply- https://pcpartpicker.com/product/8vxfrH/antec-power-supply-bp550plus
And I know you didn't ask but I have 8gb RAM.
Do you have AMD Overdrive installed? If you do that could be causing the crashes due to a conflict with Wattman. Even if Wattman is not installed.
If you have AMD Overdrive installed, uninstall it after resetting your GPU card back to "Default". Go to Windows Uninstall in Control Panel and see if your see AMD Overdrive in the software listings.
I don't have AMD Overdrive installed. The only AMD software I have listed in Control Panel Add/Remove Programs is "AMD Software".
I don't have any overclocking software installed, either.
You know what, I got off track from your original post. Your original post was about the GAME of Fortnite Battle Royale crashing. I went to the website of the game and found out they have a very new patch 3.1 for the game. If you don't have this patch installed, install it. It might be the fix you are looking for. Here is a copy from the Patch 3.1 notes that was sent out on February 28, 2018:
Back To Top
Check the Fortnite: Battle Royale system requirements. Can I Run it? Test your specs and rate your gaming PC. System requirements Lab runs millions of PC requirements tests on over 5,000 games a month.
I highlighted the parts that involves crashes. Let me know if you have this patch installed and if you do install it whether it makes a difference.
here is the Minimum and Recommend Computer Requirements to run the game:
I've had this patch since it dropped (Epic Games forces patches, and they update FNBR weekly), and I've had 18 crashes since that patch. Nothing new/good about it.
I have minimum recommended specs to run the game, and the only piece I fail on recommended specs is my graphics card (my HD 7850 vs HD 7870 or better).
The minimum is a Intel HD 4000. It Recommends a HD 7870 for playing the game well. So you should be good to go.
Have you opened up a Post at the game site Forum and see if anyone else is having similar problems?
Otherwise, I would contact the games Support site and see if they believe its a GPU driver or Game issue that is causing the crashes. Most likely they are going to say it is a GPU driver issue but they may offer some suggestions on how to configure the game so it won't crash.
You can always try a Previous AMD driver and see if the crashes stop. Also check to see if your Motherboard's Intel Chipset and BIOS is up to date. You didn't mention the Make and Model of your Motherboard. Updating the Intel Chipset and also the BIOS will make newer drivers work correctly. Only update the BIOS if you're totally comfortable doing it.
Otherwise, Good luck. Hopefully either a AMD driver or Game patch update will fix your problem.
I posted on their forum before posting here. I didn't get a response.
Others have posted similar problems (there, on reddit, on other forums). No fixes reported outside of what we've tried.
All that said, I think I may have figured it out! A few days ago I noticed I was crashing more frequently and earlier in a match. My apartment was a few degrees warmer than normal. I figured it was a temperature issue. I'd been monitoring my processor and GPU temps for awhile now - GPU still never went above 70-72°C, but maybe just being there was unstable for my card for whatever reason. I installed MSI Afterburner and setup a custom fan speed profile based on GPU temp. Knock on wood, but keeping temperature at/below 68°C seems to have solved the issue.
Sorry to have you two working so hard when I should have put more effort troubleshooting temperature earlier in the process. Regardless, thanks for all your help!
Glad to hear you found out, at least for now, the cause of your problem. I find it really strange that your GPU card would start acting up at temperatures above 70 degrees C. Normally that temperature would be easily within range of most GPU cards. From what I have been reading the 7850 can operate in temperatures around 80 degrees C.
But the point is moot, Since your card works correctly below 70 degrees C. that is all the matters.
Well honestly the standard fan profile should work unless your operating the card outside of standard settings. I understand your frustration. I figured that out to and set custom fan profile in Wattman so mine never goes above 65 and no more lockups from heat. Anything over 70 locks me up and even this is within what the card should do. The good thing about the using Wattman to control these over afterburner is that the power phasing, clock speeds and fan speeds all dynamically change and it doesn't become incompatible with the Chill function. The Wattman feature when everything is working is truly awesome. It's just unfortunate that the default fan and power limit settings don't appear to work for so many people. Gotta wonder why the don't just give in and by default give the cards more power and click the fans on sooner, and save all everyone the the headaches of lockups and struggling to find solutions where we can.