cancel
Showing results for 
Search instead for 
Did you mean: 

Drivers & Software

hardcoregames_
Big Boss

Re: Constant BSOD page_fault_nonpaged_area AMDLOG.sys

I tested my G.Skill Flare X RAM on my MSI X470 Gaming Plus and it works fine on that board.

The speed is obviously dependant on the CPU installed.

0 Likes
damname
Adept I

Re: Constant BSOD page_fault_nonpaged_area AMDLOG.sys

what speed ram should i choose? 2933, 3000, 3200....3400?? cpu r5-2600 . as it stands if i try to use my mushkin 2933 @ 2933, the system is unstable.

0 Likes
damname
Adept I

Re: Constant BSOD page_fault_nonpaged_area AMDLOG.sys

i have it set to factory defaults in bios now. ram is running at something like 2400 or something like that.

0 Likes
hardcoregames_
Big Boss

Re: Constant BSOD page_fault_nonpaged_area AMDLOG.sys

damname wrote:

what speed ram should i choose? 2933, 3000, 3200....3400?? cpu r5-2600 . as it stands if i try to use my mushkin 2933 @ 2933, the system is unstable.

According to the AMD CPU manual the R5 2600 is designed for DDR4-2933. If the RAM cannot do that speed it may not have XMP or complete JEDEC speeds.

0 Likes
damname
Adept I

Re: Constant BSOD page_fault_nonpaged_area AMDLOG.sys

G.SKILL Flare X Series 16GB (2 x 8GB) 288-Pin DDR4 SDRAM DDR4 3200 (PC4 25600) AMD X370 / B350 Memory (Desktop Memory) Model F4-3200C14D-16GFX

ordered... waiting

used the ram config @gskill to make sure it all lined up.

0 Likes
mstfbsrn980
Grandmaster

Re: Constant BSOD page_fault_nonpaged_area AMDLOG.sys

Annotation 2020-06-12 021730.png

The maximum RAM speeds specified by the processor and  by the motherboard may be different. Your motherboard has 3200 support.

hardcoregames_
Big Boss

Re: Constant BSOD page_fault_nonpaged_area AMDLOG.sys

damname wrote:

G.SKILL Flare X Series 16GB (2 x 8GB) 288-Pin DDR4 SDRAM DDR4 3200 (PC4 25600) AMD X370 / B350 Memory (Desktop Memory) Model F4-3200C14D-16GFX

 

ordered... waiting

 

used the ram config @gskill to make sure it all lined up.

I use that for my X570 and R5 3600 CPU, very stable on default settings

damname
Adept I

Re: Constant BSOD page_fault_nonpaged_area AMDLOG.sys

ram just came and i slapped it in and set the xmp profile to 3200. it detected the correct timings and all that. booted the pc and opened msi command center which is reporting the dram freq @ 2400. opened task manager and it is also reporting the freq at 2400. restarted the pc and checked the settings in bios....all is well. restarted again and booted into win10 and its still reporting the ram at 2400 with incorrect timings. not sure what im doing wrong here. been checking google and no joy on this. anyone?

i have the latest bios version btw.

0 Likes
hardcoregames_
Big Boss

Re: Constant BSOD page_fault_nonpaged_area AMDLOG.sys

damname wrote:

ram just came and i slapped it in and set the xmp profile to 3200. it detected the correct timings and all that. booted the pc and opened msi command center which is reporting the dram freq @ 2400. opened task manager and it is also reporting the freq at 2400. restarted the pc and checked the settings in bios....all is well. restarted again and booted into win10 and its still reporting the ram at 2400 with incorrect timings. not sure what im doing wrong here. been checking google and no joy on this. anyone?

 

i have the latest bios version btw.

CPU and motherboard, also PSU is helpful

0 Likes
damname
Adept I

Re: Constant BSOD page_fault_nonpaged_area AMDLOG.sys

its listed in the original post up top.

cpu= ryzen 5 2600,

gpu = rx 590,

1tb crucial ssd, (crucial oops!)

1tb hdd,

mb = msi b450 gaming plus on win10 machine.

water cooled

psu is apevia 700 watt (just replaced a gold cert 600w psu trying to figure this out)

0 Likes