cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

Drivers & Software

_velik_
Journeyman III
‎12-06-2020 07:59 AM

Can't choose HDD in StoreMI

Hello. I installed StoreMI, and I can't choose my HDD as "Source Device", because "it's connected to third party controller", but cable goes right to the motherboard. How can I fix it?

3600
Asrock B450 Gaming K4

0 Likes
1 Reply
RyZEN1
Staff
Staff
‎01-07-2021 12:59 PM

I see the board that you are using has the below SATA Ports as per the Board's Spec

- 4 x SATA3 6.0 Gb/s Connectors, support RAID (RAID 0, RAID 1 and RAID 10), NCQ, AHCI and Hot Plug*
- 2 x SATA3 6.0 Gb/s Connectors by ASMedia ASM1061, support NCQ, AHCI and Hot Plug*

The reason StoreMI doesn't allow to choose HDD could be because it is connected to one of the "- 2 x SATA3 6.0 Gb/s Connectors by ASMedia ASM1061, support NCQ, AHCI and Hot Plug*" ports which is not support by StoreMI.

All you need to do is change the SATA cable to connect to one of the "- 4 x SATA3 6.0 Gb/s Connectors, support RAID (RAID 0, RAID 1 and RAID 10), NCQ, AHCI and Hot Plug*" port and try StoreMI again. In this case the HDD should be accessible and eligible.

 

0 Likes