cancel
Showing results for 
Search instead for 
Did you mean: 

Drivers & Software

Fukush
Journeyman III

BOOST

Hello EVERYONE! 

How can i get my PC Boosted correctly to it's max

My PC Configuration is here :

mb gigabyte b450m-ds3h am4 oc sata3 m2

AMD Ryzen 7-2700x

Radeon RX 560x

16 GB RAM 3200 MHZ

0 Likes
2 Replies
benman2785
Big Boss

hi,

a Ryzen 7 2700X will boost to max 4300MHz + XFR

1. download HWiNFO64 and set polling rate to 250ms
2. do a CMOS reset and only enable your RAM OC or XMP
3. boot into Win10 and open HWiNFO64
4. wait for 5min

check "Core X Clock" "Maximum" - this will show what cores have boosted to what clockspeed

have in mind - for XFR or Boost in general you have to have good cooling
also: boosting with load will result in a lower boost; there is a singlecore boost and an allcore boost

ps my 2700X with Thermalright Macho120 AM4 boosts between 4275MHz-4350MHz (but only 6 of my cores hit 4300MHz frequently) // when doing hard load on CPU my **bleep**ty GA-AX370-Gaming 5 boosts to 3900MHz - even if i am only at 63°C - but this is because of the bad Job Gigabyte has done with the BIOS...

PC: R7 2700X @PBO + RX 580 4G (1500MHz/2000MHz CL16) + 32G DDR4-3200CL14 + 144hz 1ms FS P + 75hz 1ms FS
Laptop: R5 2500U @30W + RX 560X (1400MHz/1500MHz) + 16G DDR4-2400CL16 + 120Hz 3ms FS
0 Likes

@Fukush 

here you see my boost behaviour of my Ryzen 7 2700X
2700X @stock2700X @stock

you see that i hit atleast 4315MHz (aka 4325MHz) on every core - but only on singecore-boost
two cores even got 4350MHz - aka max boost + XFR(2)
ps the 10MHz differenz is because my bclk is around 99.6MHz - because of "spread spectrum" what cant be disabled in my BIOS :/

PC: R7 2700X @PBO + RX 580 4G (1500MHz/2000MHz CL16) + 32G DDR4-3200CL14 + 144hz 1ms FS P + 75hz 1ms FS
Laptop: R5 2500U @30W + RX 560X (1400MHz/1500MHz) + 16G DDR4-2400CL16 + 120Hz 3ms FS
0 Likes