Showing results for 
Search instead for 
Did you mean: 

Drivers & Software

Adept I

AMD x470-based server, RAIDXpert2 email notifications

Using an Asrock X470 board for my new server.  First time using RAIDXpert2, Normally use Intel chipset-based RAID or hardware RAID controllers.

I don't see any way to send email notifications if a RAID failure occurs.  Since this is a server I won't be in front of it on a daily basis, so I need some way to get notified of a RAID issue.  Is there something I'm missing?  I've simulated a drive failure and there is no audible alarm from the motherboard.  A message pops up on-screen, but there is no Windows Event Viewer entry created that I can create a task from.  Any suggestions?

10 Replies
Community Manager

There was a feature to send email notifications however it was removed as it did not work. So it is no longer supported in the latest builds. 

Thanks.  Any other solutions?  For a server there needs to be some sort of ability to be notified.  If the RAID triggered an entry in the Windows Event Log I could at least trigger something off of that.


I would recommend checking through the help document in the UWP app to see if you can find anything that could be what you are looking for. 

Not sure what documentation you are referring to, but I didn't see anything in the RAIDXpert 2 manual.

This is pretty frustrating.  If the email functionality doesn't work, why not fix it?

I've never seen RAID management software without email notification.  I mean, at least register an event in Windows Event Viewer!

Looking for input from anyone who has worked around this issue.


Yes i was referring to the RaidXpert 2 manual. Notifications and log files are mentioned on page 114 and 115, but i don't think that's what you are looking for. Sorry i can't be of more help. 


I was able to find a solution using the command line utility RCADM.  Although the PDF documentation doesn't state it will send email notifications, looking at the command line help I found it will along with creating Windows Event Log entries.  This is the command I use:

"C:\Program Files (x86)\RAIDXpert2\rcadm" -F --delay 30 --mail-address --from-user --mail-server --syslog

The program stays running.  I have this running all the time using a Scheduled Task (run at startup) and it seems to work well.

Hi bjjdad73, I've also studied RCADM a bit in the hope of getting notifications via eMail about some newly created RAID Arrays.

rcadm --follow --help says:
rcadm -F


Long form:
rcadm --follow [--test-mail --mail-address <to_email_address>
--mail-server <email_server>
--from-user <from_email_address>] [--syslog]

Short form:
rcadm -F [-tm -ma <to_email_address> -ms <email_server>
-fu <from_email_address>] [-sl]

Long form:
rcadm --follow --delay <seconds>
[--mail-address <to_mail_address> --mail-server <email_server>
--from-user <from_email_address>]
[--program <program>]
[--scan] [--syslog]

Short form:
rcadm -F -d <seconds>
[-ma <email_address> -ms <email_server> -fu <from_email-address>]
[-p <program>] [-s] [-sl]


-tm, --test-mail
Sends a test email message. Used with the --mail-address, --mail-server, and
--from-user flags.

-ma, --mail-address
Specifies the email address to notify when an event occurs, such
as a disk failure or an array going offline. Also specifies an
email address to which to send an email test message.

-ms, --mail-server
Specifies the email server to send mail through.

-fu, --from-user
Specifies the sender's email address for email notifica-
tion. Used with the --mail-address option when sending email

-p, --program
Specifies the program to execute when an event occurs.

-sl, --syslog
Logs events with critical and error serverity levels.

-d, --delay
Specifies the number of seconds to wait between polling the
disks and arrays.

-s, --scan
Uses variables found in rcadm.cfg instead of command line arguments.
If the file exists, the values specified in the file are used unless
explicitly set otherwise on the command line. The file rcadm.cfg must
be in the same directory as rcadm.exe.

Example: MAILADDR <>
MAILSERVER < or IP address>
PROGRAM <program to run>

-l, --language
Specifies the language locale digit to print the messages.

Example: -l 0 /* English */


Example: Poll for status every 30 seconds and logs event to system log
and send email when an event occurs.
rcadm -F --delay 30 --mail-address
--mail-server --syslog

Example: Poll for status every 60 seconds and run a program when an
event occurs.

rcadm -F --delay 60 --program myprog.exe

Example: Send a test message.

rcadm -F --test-mail --mail-address

So, how to add username and password for the mailserver? And what's about SSL/TLS?

Funny thing beside, in Raidexpert2 Ver. 6.1.5-00025 you have the Option to set eMail-notifications via "Options > Notification" (which by the way doesn't work for me as I always get the Error "Mail Server Connection Issue"):


All Data filled there will be saved as plain text (incl. Password!) in rc_cgi_config.txt...  


The feature never worked properly so it was removed so you will not be able to make it work. 

The solution, for all landing here searching for help, was pretty simple:

  1. Download E-MailRelay, extract and start the emailrelay-setup.exe as Administrator
  2. Follow the easy-peasy assistant to Set-Up the Relay
    1. Installation type: SMTP server
    2. Mail forwarding: Synchronously
    3. Local Server Port 25
    4. No Authentication / No TSL/SSL encryption
    5. Remote server: Port: (for example SSL: 465 or TLS/STARTTLS: 587)
    6. Check Supply authentication - provide Account Name and Password, check Use TLS/SSL
    7. No Server / Client Filter
    8. Logging: as is
    9. Connections: Listen on, hit One: Interface (<= that will be your SMTP Server for AMD Raid notifications)
    10. Server startup > Automatic > At system startup > Finish
  3. Now, for Raidexpert2 Ver. 6.1.5-00025 go to  "Options > Notification" and fill "Outgoing Mail Server (SMTP)" with, "To Email Adress" with the adress you want to send your notifications to and "From eMailadress" with the adress you've set-up in the E-MailRelay on point 6.
    Leave "Server requires Log-in" unchecked - as this function does not work and as that's why we're making this work-around via e-MailRelay.
  4. If your Raidexpert2 Version doesn't have Notification Option, use the run at startup Scheduled Task as descriped above by bjjdad73 or use/add C:\Program Files (x86)\RAIDXpert2\rc_cgi_config.txt

    LOW ft
    WARNING tt
    FATAL tt
  5. Finish - but shameful for a big company like AMD not being able to solve easy things like that while otherwise promoting RAID features by selection and selling of the chipset.

How do we get this version?  Apparently they have decided to move it the Microsoft Store, and there is still no email notification support.

I have searched online for that version of raidxpert2 and I cannot find it.