cancel
Showing results for 
Search instead for 
Did you mean: 

Drivers & Software

mstfbsrn980
Grandmaster

Re: AMD 20.3.1 & 20.4.1 Drivers - Blackscreen issues 5600xt

I can't see a reason why this system doesn't work stably. But if you have a restart problem, it may be useful to try your system with the stable system's PSU. Your PSU may be reaching the end of its life. You can set GPU power limit to -20% or -30% with WattMan for decreasing PSU load. You may need to also check your processor temperature. Graphics cards do not usually cause restarting problems. The components of your hardwares you choose have high quality. I hope you find out what the problem is.

0 Likes
mickeekung
Challenger

Re: AMD 20.3.1 & 20.4.1 Drivers - Blackscreen issues 5600xt

I have this problem too. This is my PC build.

Window 10 64bit

AMD Ryzen 5 3600

ASUS ROG STRIX 5600XT 6GB

AM4 Ryzen ASUS TUF GAMING X570-PLUS 

HYPERX FURY 16GB BUS 3200

POWER SUPPLY  COOLER MASTER ATX  MWE GOLD 650 WATTS

HDD 2 TB WD BLACK

SSD 250 GB WD Blue NVMe

0 Likes
mstfbsrn980
Grandmaster

Re: AMD 20.3.1 & 20.4.1 Drivers - Blackscreen issues 5600xt

But also your hardwares are very good. You shouldn't have a problem. I don't know the cause of the problem but I would like to share the following informations.

Your mobo wants to 8+4PIN CPU power supported PSU. This is not necessary but the mobo may want a good PSU than yours.
Annotation 2020-04-07 130137.png

Because as you can see, your PSU only supports 8PIN CPU power.

Annotation 2020-04-07 130418.png

Annotation 2020-04-07 130454.png

Obviously I think your PSU has very good quality. You shouldn't have a problem. But if I had x570, I would have chosen a better PSU. Because the capacity of your PSU is very close to the system requirements. This can cause your PSU to become warmer. It may cause your hardware to overheat. Don't worry about the money you give to PSU. Because PSU choose is very important. If you cannot stabilize your system despite all attempts, make sure you use your consumer rights. If new hardware is troubling, it will lead to bigger problems in the future.

0 Likes
nbdt
Adept I

Re: AMD 20.3.1 & 20.4.1 Drivers - Blackscreen issues 5600xt

I have the B450 board so the 8pin is sufficient for me. I did every suggestion made on the forums. But here's the thing, I don't have any crashes for about 2 days since I set the power limit of the card to 30% on afterburner. No negligible performance loss either and I was able to oc my 5600xt to the max 1820mhz and 1860mhz for memory. I don't think my psu is causing any issues because it's fairly new, it's a seasonic m12 700w unit and it's 2 years old. I hope this can help. I virtually did every suggestion on the forums, even tried a fresh install, but this one might have permanently fixed it. I'll update in a week if a crash occurs. Tell me if it works!

0 Likes
misteright
Adept II

Re: AMD 20.3.1 & 20.4.1 Drivers - Blackscreen issues 5600xt

What brand is your rx 5600xt? All i know is the power limit of the card is only 10% max or am i missing something?ny

Reaching 1820mhz core clock actually easy for this card even with undervolting. But memory OC is different things, you can reach stable 1860mhz is already achievment. Have you try it with heavy game after OCing mem clock? I mean 3dmark alone is not enough for streest test nowadays because newer games are far heavier that a streest test in 3dmark.

0 Likes
nbdt
Adept I

Re: AMD 20.3.1 & 20.4.1 Drivers - Blackscreen issues 5600xt

A bit of a correction, what I meant to say is -30% my 5600xt is the Gigabyte Gaming with the tri fan design, I just played AC Odyssey for an hour and a half and no issues so far.

0 Likes
misteright
Adept II

Re: AMD 20.3.1 & 20.4.1 Drivers - Blackscreen issues 5600xt

Man that is awesome. I'm using MSI RX 5600 XT MECH, not my first choice so i kinda dissapointed.

I can reach 1820Mhz core clock easily by downvolting to 915. But the mem clock is different things. I can only hit 1620Mhz max which is suck.. But glad that core clock has a bigger impact for gaming than memory clock.

0 Likes
ken429
Adept I

Re: AMD 20.3.1 & 20.4.1 Drivers - Blackscreen issues 5600xt

I'm in the same Bug Check boat with my RX 5600 XT's except I'm using them for mining using the Claymore miner.  I have the system set up with the 2-5600's and three GTX 1600 cards.  The system is using the Intel GPU built into the G4400 CPU for display.  I never seen or heard of the Bug Check error until I made the "mistake" of trying the AMD cards.  I have two other miners running NVIDA cards using the built in Intel GPU and they have been running for years without an issue.  These two miners share a screen and mouse via a two way TVSmart KVM Switch.

Anyway, I was experiencing a Bug Check once every two weeks or so on the system with the 5600's.  Then I got cute and tried to use a second two way TVSmart Switch connected to the miner with the 5600's and my Home Server.  Once I connected the Miner with the 5600's to the Switch I got the Bug Check error ever few minutes!  It did seem to extend the time between Bug Checks by a few minutes if the Miner was not selected on the switch but that may have been fluke.  So whatever the driver problem the KVM Switch brings it out immediately and often!

The RX 5600 XT's are great miners but the driver flaw is a giant pain.  Please, please fix the #$%^ isuue.  I want to buy more of these cards for mining but I not until they work correctly.

0 Likes
ken429
Adept I

Re: AMD 20.3.1 & 20.4.1 Drivers - Blackscreen issues 5600xt

Does anybody form AMD look at this forum?  What do I have to do to get a response.  I can make the 5600 driver fail at will!

0 Likes
hardcoregames_
Big Boss

Re: AMD 20.3.1 & 20.4.1 Drivers - Blackscreen issues 5600xt

20.7.1 is now available, give it a whirl

0 Likes