The program you use has different loads on the processor for nVidia and AMD graphics cards. The error message you get is most likely sourced from the processor. Go to the BIOS and disable turbo boost for CPU and try again. If there is a problem, there may be a problem with the GPU as you type.
You receive error code 0x00000133. This code is not something I have experienced. When I do research, it is said that the error releated from HDD or driver. But I'm not sure. The error code you experienced is different from I experienced and solved WATCHDOGS error. If you are using a M2 disk (without RAID) and can find its setting in the BIOS, set Gen4 (or Auto) to Gen3 for PCI settings.
Do you have 4 sticks of Ram installed? I remember having this issue when OCing my RAM to 3200MHz on my Ryzen 7 1700 + Asus X470 Strix. I was stress testing in P95, Large FFTs to stress memory controller and it would do the mouse stutter and CPU utilization would never reach 100% and it would eventually BSOD or just freeze up my PC after like 10 minutes.
I solved it by increasing my SOC Load Line Calibration to max (Level 5) so that there wouldn't be a voltage drop when the SOC is underload. This solved my stability problems there.
Yeah, in BIOS you should see that option. I needed it for four 8GB dimms. You should maybe try it anyway though. Maybe all that 16GB on 1 dimm puts more a load on the CPU's SOC as well.
Error Message: DPC_WATCHDOG_VIOLATION
Error Code: 0x00000133
The associated dll or sys was not given because dmp was not properly shared.
OP has this error message. Does anybody get this message and know the solution?
Thanks to you all for your input. Unfortunately nothing has worked.
I am 99% certain its a driver issue as previous versions of drivers have worked.
Its really annoying to even have to fix these things when all you want is to plug and play...
Hope AMD learn a lesson and release stable drivers with their hardware in the future.
Do you think this issue is valid for RMA? thinking of just changing it for something else at this point.
it is not the video card, is an issue with the driver and the windows screen scaling
On Wed 18-Sep-19 10:54:11 PM your computer crashed or a problem was reported
crash dump file: C:\Windows\LiveKernelReports\WATCHDOG\WATCHDOG-20190918-2254.dmp
This was probably caused by the following module: atikmpag.sys (0xFFFFF80419EB077C)
Bugcheck code: 0x141 (0xFFFFAD039DDEB410, 0xFFFFF80419EB077C, 0x0, 0x0)
file path: C:\Windows\System32\DriverStore\FileRepository\u0346729.inf_amd64_aea6bce152d9aed0\B346681\atikmpag.sys
product: AMD driver
company: Advanced Micro Devices, Inc.
description: AMD multi-vendor Miniport Driver
Bug check description: This indicates that one of the display engines failed to respond in timely fashion.
A third party driver was identified as the probable root cause of this system error. It is suggested you look for an update for the following driver: atikmpag.sys (AMD multi-vendor Miniport Driver, Advanced Micro Devices, Inc.).
Google query: atikmpag.sys Advanced Micro Devices, Inc. VIDEO_ENGINE_TIMEOUT_DETECTED