cancel
Showing results for 
Search instead for 
Did you mean: 

Archives Discussions

birgit_b
Journeyman III

Silent install FirePro v4900 Driver on Windows Embedded 7 Standard

Hey!

I'm trying to install the Drivers for a FirePro v4900 on a Windows Embedded 7 Standard 64bit OS. I want the system to be as small as possible, so i would rather not install the whole catalyst control center, but only the necessary drivers. Because the installation should be accomplished absolutely unattended, the installation process of the FirePro-Driver should also be done without any user interaction. I see two possible solutions for the Problem:

  1. Install only the Drivers: Is it possible to solely install the necessary drivers? How would i achieve that? This solution would be the preferred one, because of the smaller footprint.
  2. Silent custom install the provided "FirePro_8.911.3.3_VistaWin7_X32X64_135673.exe" (found at http://support.amd.com/us/gpudownload/fire/Pages/fire_win7-64.aspx). Is there a way, to do that?

Thank you in advance for your support!

Best regards,

Birgit B.

0 Likes
2 Replies
kcarney
Staff
Staff

Re: Silent install FirePro v4900 Driver on Windows Embedded 7 Standard

Birgit,

Interesting question. Since you haven't received any responses on the forums yet, you might try sending your question to AMD Customer Care: http://emailcustomercare.amd.com/

Good luck!

Kristen

0 Likes
chm
Staff
Staff

Re: Silent install FirePro v4900 Driver on Windows Embedded 7 Standard

Hi,

it is possible to install only the driver. You can extract the driver package and you will find in the folder Packages\Drivers\Display\W76A_INF the msi that will only install the display driver.

If you are looking for a command line based silent install please extract the driver as well and check for the ATISetup.exe in the bin folder. Running ATISetup.exe /? will list all options you have. One is -USE which allows to select a particular package to be installed.

0 Likes