cancel
Showing results for 
Search instead for 
Did you mean: 

Archives Discussions

optimiz3
Adept II

How Can I Debug/Profile a DirectCompute Shader?

We have a DirectCompute shader that is running extremely slow and are trying to determine the cause.  We cannot use OpenCL because the target is a Windows Store application, which will not pass certification if it links to OpenCL.

We've tried the following:

1. Profile OpenCL implementation then back-port to DirectCompute.  Unfortunately the OpenCL implementation version runs perfectly fast, but runs slowly once back-ported to DirectCompute.  We suspect this is due to the DirectCompute FXC compiler poorly optimizing the generates IL bytecode, but have no profiling tools available to be sure.

2. Examine the produced DirectCompute IL output.  It appears the produced DirectCompute IL may be using too many temporary registers (VGPRs in AMD parlance), but we have not found a way to determine how the AMD driver is translating the DirectCompute IL to AMD IL or device specific byte code.  The AMD driver may be optimizing out some of the temporary registers or there may be some other performance issue.

3. We've also tried specifying D3D11_CREATE_DEVICE_DEBUGGABLE to D3D11CreateDevice (which is documented to enable performance counters), however doing so causes D3D11CreateDevice to fail with DXGI_ERROR_UNSUPPORTED on AMD platforms.

Net: We need some way to either profile the DirectCompute shader to see VGPR, SGPR, and other occupancy telemetry, OR some way to examine the final AMD IL or device specific byte code.

Please help, thank you!

Our platform is:

Windows 8.1 64bit w/ Update

Radeon R9 290

CodeXL 1.4.5724.0

APP SDK 2.9

Visual Studio Ultimate 2013 Update 2

AMD Catalyst Version: 13.12

Driver Packaging Version: 13.251-131206a-166151E-ATI

EDIT: Attached is an image showing the limited CodeXL DirectCompute profiling output:

codexl.png

0 Likes
2 Replies
chesik
Staff
Staff

Re: How Can I Debug/Profile a DirectCompute Shader?

Hi optimiz3,

Can you try running CodeXL as administrator to see if it makes a difference?  Are you able to get perf counter data from the profiler for your DirectCompute dispatches if you do that?

Thanks,

Chris

0 Likes
optimiz3
Adept II

Re: How Can I Debug/Profile a DirectCompute Shader?

Hi Christopher - just tried profiling as admin but saw no difference. Also tried with both D3D debug shim enabled and disabled (D3D11_CREATE_DEVICE_DEBUG) and saw no difference.

Appreciate any help!

0 Likes