cancel
Showing results for 
Search instead for 
Did you mean: 

Archives Discussions

atsign
Journeyman III

CAL samples output "not enough memory on the card"

CAL samples output "not enough memory on the card"

Hi, people!

I have troubles running some CAL samples.

>./double_matmult
Supported CAL Runtime Version: 1.3.145
Found CAL Runtime Version: 1.3.145
Locking assertion failure.  Backtrace:
#0 /usr/lib/libxcb-xlib.so.0 [0xd2a767]
................

There is not enough memory on the card to run the sample
with the given command line options. Please try again.


The same error with matrix_transpose.

hellocal, simple_matmult samples work fine and output some results (annoing backtrace info exists however).


>dmesg |grep fgl
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[fglrx] Maximum main memory to use for locked dma buffers: 1898 MBytes.
[fglrx]   vendor: 1002 device: 9452 count: 1
[fglrx]   vendor: 1002 device: 9452 count: 2
[fglrx] ioport: bar 4, base 0xd000, size: 0x100
[fglrx] ioport: bar 4, base 0xd000, size: 0x100
[fglrx] Kernel PAT support detected, disabling driver built-in PAT support
[fglrx] module loaded - fglrx 8.56.4 [Dec  1 2008] with 2 minors
[fglrx] Gart cacheable size:252 M.
[fglrx] Reserved FB block: Shared offset:0, size:1000000
[fglrx] Reserved FB block: Unshared offset:ff76000, size:8a000
[fglrx] Reserved FB block: Unshared offset:3fffb000, size:5000
[fglrx] Gart cacheable size:252 M.
[fglrx] Reserved FB block: Shared offset:0, size:1000000
[fglrx] Reserved FB block: Unshared offset:ff76000, size:8a000
[fglrx] Reserved FB block: Unshared offset:3fffb000, size:5000


CPU is Intel Core2 Quad Q6600, 2 GB RAM, Fedora9 i686 linux. Device is AMD Firestream 9250.

Please help!!

Tags (3)
0 Likes
2 Replies
udeepta
Staff
Staff

CAL samples output "not enough memory on the card"

I don't recall seeing this error before. You obviously have enough memory on the card.

Are you using the latest FireStream driver? To troubleshoot, you may want to uninstall the SDK and the driver, then re-install the driver and the SDK in that order.

http://ati.amd.com/technology/streamcomputing/sdkdwnld.html#below

What OS are you using? The next step in troubleshooting will be to try on a fresh machine with a fresh install of a supported OS.

http://ati.amd.com/technology/streamcomputing/requirements.html#operating

0 Likes
atsign
Journeyman III

CAL samples output "not enough memory on the card"

Thanks, udeepta.

The driver was the latest, uninstalling and reinstalling on Fedora 9 32-bit did not help. There was the same error.

Installing drivers and SDK on clean CentOS 5.2 64-bit helped and everything works fine.

0 Likes