Graphics Cards

[don2]

Hi all,

I have been trying to install my s7150x2 into a HP DL380 Gen9 running VMware Exsi 6.5 for about a week now without success.

I am following these instructions..
https://www2.ati.com/relnotes/setup-guide-mxgpu-setup-for-vmware.pdf

https://www2.ati.com/relnotes/setup-guide-mxgpu-setup-for-vmware.pdf

the host drivers include 2 vib files, I'm not sure what the difference between the 2 is, but I've tried both without success.

amdgpuv-1.05-1OEM.650.0.0.4598673.x86_64-CL1424097.vib

amdgpuv-cim-1.00-6.5.0-4598673.vib

The error I come up against when running the mxgpu-install.sh installation script is...

Detected 0 SR-IOV GPU

No SRIOV GPU found.

that appears to be telling me the s7150x2 card is not being found in the system.

I have checked in bios and SRIOV is enabled

I'm not sure what to do now, can someone offer some suggestions.

Thanks for your help

[goodplay]

fsadough​ may be able to help with that.

[don2]

I've just realised I don't have a power cable for this.

It didn't come with a power cable and I'm having terrible trouble trying to find one online to buy.

Can someone tell me the correct part number for the power cable for use in a HP DL380 Gen9.
The server side of the cable needs to be 10 pin and the card side 6pin+8pin

thanks

[ashlar-vellum_robert-bou]

For some non-AMD/ATI GPU boards for some DL380 G7s and some DL580 G7s we ordered the supposedly appropriate cables on eBay.

We ordered more than a dozen cables via eBay, some were correct, some were not.
In the end, we obtained the tools and parts to re-work the cables as needed.

You can use eBay search for:  10pin to 6+8pin GPU DL380 G9

And maybe look into Molex tools (crimpers, extractors, etc) and parts via Google.

[spierrelouis]

I have the same issue. Does the AMD Firepro S7150x2 require a power cable (6+8pin) that will be attached to the PCI board (10pin)? I received a Firepro S7150x2 card but it doesn't came with the power cable. It is for an HP DL380 G9.

Regards.

[mshamsj]

Hi,

After 3 years of your post; I have the same issue. No power cable.

Could you please help me with the correct part number or pinout of the power cable?

Thanks