Hello.
Concrete example for
880g/sb850
Windows 7 x86 driver
AMD AHCI Compatible RAID Controller
Advanced Micro Devices, Inc.
date: 29.12.2011
version: 3.3.1540.29
is working together with
SCSI\Disk
Microsoft
date: 21.06.2006
version: 6.1.7600.16385
installed for
SCSI\DiskAMD_____x+0_Stripe/RAID01.10 (x+0 RAID array)
or
GenDisk (single disk)
is working together with
BIOS AMD extention
version: 3.2.x
1. Does not support HIPM power management.
2. Can not transfer data faster than 1-1.5Gbit/s per SATA physical port for tested SSD single disk (in comparison with ACHI mode, where the same port can transfer up to 2-3Gbit/s with the same disk)
In fact, SATA physical ports works in "legacy IDE mode with hotplug support". I do not know about data transfer rate, but why HIPM is not supported and unused HDD device can not power down?
The same with AMD sb710 and appropriated software.
Who are maintaining the "AMD AHCI Compatible RAID Controller drivers"? How to post feedback to them?
Solved! Go to Solution.
The suspicious program, blocking sleep state is "AMD AHCI Compatible RAID Controller" driver. But i am not sure.
No, this is not the "AMD AHCI Compatible RAID Controller" driver.
There is way to checkout, run as administrator
>powercfg -energy -output .\report.html
or
>powercfg /requests
SYSTEM:
[DRIVER] kX 10k1 Audio (3550) - Generic
to override incorrect driver request, type
>powercfg /requestsoverride DRIVER "kX 10k1 Audio (3550) - Generic" SYSTEM
I suppose the last line could be installed as taskschd.msc (periodic) job if the changes are not permanent for reboot.
I have answered to myself.
Pictures
1. Installed devices
2. There are no power settings for ACHIand can not be enabled
3. There is no HIPM support by AMD RAIDxpert
Does anybody else use RAID?
but why HIPM is not supported and unused HDD device can not power down?
The problem is not only that there is no LPM support for "AMD AHCI Compatible RAID Controller", but computer is insomniac - can not sleep and its HDDs can not spin down, while power option "sleep state controlled by software" is enabled. The suspicious program, blocking sleep state is "AMD AHCI Compatible RAID Controller" driver. But i am not sure.
The suspicious program, blocking sleep state is "AMD AHCI Compatible RAID Controller" driver. But i am not sure.
No, this is not the "AMD AHCI Compatible RAID Controller" driver.
There is way to checkout, run as administrator
>powercfg -energy -output .\report.html
or
>powercfg /requests
SYSTEM:
[DRIVER] kX 10k1 Audio (3550) - Generic
to override incorrect driver request, type
>powercfg /requestsoverride DRIVER "kX 10k1 Audio (3550) - Generic" SYSTEM
I suppose the last line could be installed as taskschd.msc (periodic) job if the changes are not permanent for reboot.
I have answered to myself.